Let’s take a look at the brand new Vandero Pro Front Hub and the Hazard Lite Front Wheel from Odyssey!
Vandero Pro Front Hub
Is it time for a new front hub? Here’s a closer look at the new Vandero Pro front hub from Odyssey. This front hub starts out with a 7075-T6 aluminum hub shell with precision bored fully centric bearing seats for a smoother spin and prolonged bearing life. Inside you can find 6903RS sealed cartridge ball bearings with a 17mm 7075-T6 aluminum center axle with steel helicoil thread insert and 3/8″ heat-treated chromoly axle bolts with 17mm wrench flats and 6mm hex slots to keep it all tight.
As you can see from the photos, this hub comes with replaceable plastic hub guards on both sides that you can choose to run or remove. The Vandero Pro hub guards are made from a proprietary plastic and are designed to be press fit, so you don’t have to mess with the hub to install them.
The Vandero Pro Front Hub is available in black and polished with a weight of 11.2 oz. for $69.99 through BMX shops and mail-orders that carry Odyssey BMX worldwide now.
Odyssey Hazard Lite Front Wheel
If you’re on the hunt for a complete front wheel, then you’re in luck because the Vandero Pro Front Hub is also available on the new Odyssey Hazard Lite Front Wheel. This wheel starts out with the Vandero Pro hub laced to a Hazard Lite rim. The Hazard Lite 36-hole rim is made from 6000 series aluminum with a 32mm width, 17mm height with a 390 ERD.
The Hazard Lite Front Wheel is available in Black and Chrome for $149.99 – $159.99 through BMX shops and mail-orders that carry Odyssey worldwide now as well.
What do you think? Have any questions? Let us know in the comments and we’ll get back to you!
Check out more from Odyssey BMX