Need help figuring out what size spokes you need for your BMX wheels? Here’s a BMX Spoke Calculator that should be able to help you figure out what size spokes you need for your BMX wheels.
Our friends at Manyfest BMX over in Poland have hooked us up with a BMX tool that we think will help out a ton of BMX riders. There’s nothing worse than breaking a bunch of spokes or planning to build up a new wheel set and not knowing what size spokes you need. Luckily, this super useful BMX Spoke Calculator is available to help you figure out just what spoke size you need! This already has a ton of different hubs and rims, but as always, there are new hubs and rims becoming available all the time. This calculator offers spoke sizes for 3-cross and 4-cross spoke patterns.
Need help building up your wheel? Here’s a video show you How To Build a 36-Hole BMX Wheel that should help.
Here’s How To True A BMX Wheel as well.
If you do not see your hub or rim listed, please let us know in the comments below and we’ll get to work on figuring out the sizes so we can help get you sorted out and back to rolling on your bike!
BMX Brands – If we don’t have your hubs or rims listed, please let us know! We want this to be the most complete and up to date BMX Spoke Calculator.
Are you stoked on this tool? Please give it a Share on Facebook, Twitter, etc. to help spread the word! We appreciate it.
Once again, big shout out to Manyfest BMX for this amazing BMX Spoke Calculator!
Note: We are not responsible for incorrect spoke calculations. The calculator uses information that was either supplied to us by the brand or information found online through reputable BMX dealers, but cannot be guaranteed due to specs or design changes, incorrect measurements supplied or other aspects outside of our control.
Karl says
I have the Profile racing mini cassette rear hub And plan to lace it to an old school Alex Supra G rim with rim height of 20mm can somebody tell me what length spokes I need for drive side and non-drive side ?
Thank you much appreciated !
Beezee says
I had a KHE Astern freecoaster hub, laced to a Proper rim and ordered the spoke length I got from the calculator, to lace 3 crossed to a cinema 777 rim. When I got the spokes and trued the wheel, spoke length was to big and surprisingly the spokes that were there with the Proper rim ended up being the right ones. Is there something wrong with the calculator?
Kurt says
Sorry about that. It’s possible the hub or rim information changed. We use the information supplied to us by the brand or what is listed online if the brand isn’t responsive to requests (Oddly it’s like pulling teeth trying to get hub specs and rim ERD info). A lot of the hubs and rims listed were supplied by Manyfest BMX as well before we uploaded this, so it’s possible the info changed since then. I’ll see what I can figure out.
Hector says
G-Sport Roloway cassette hub. Appreciate it
Postman559 says
Could you add the Animal SteamRoller 20” when you get the chance
Leon says
I have alienation 440 rim and I am getting tall order drone cassete hub and I dont know which size spokes I need, every time i check here the spoke lenght changes, could you help me?
Rob says
I think Flybikes has published the wrong flange distances on their Magneto specs. Don’t see how they could be 29DS and 19NDS. I’ve got a pair on order so am curious what the deal is…
Kurt says
Hey Rob,
I’m double checking but I got the numbers from David, the owner of Flybikes and designer of the hubs. I think it’s because the driver is a little different and sticks out further than a regular driver would, which decreases the offset of the flange.
Randy Callahan says
Alex g303’s. They are older i think, but they are the rims id like to put new hubs on so hope some calculator has them so i can reuse them!
Thanks
Frankie M says
Hi just came across your site and found one of my rims data. Eastern nitrous, however I also have some old school rims 1994 CMC which I can’t find any info for. As well as a pair of nos Japan Assess hubs (high flange) and another pair of Valisium hubs (again high flange). I am currently in the process of restoring two 1985 GT bicycles and any info on either the rims or hubs would be appreciated.
710 says
Relic front hub
420 says
Eclat seismic cassette please
Andy says
Eclat blind Shane Weston signature coaster…..
Cole Adams says
Im lacing Cinema fx freecoaster to a Salt plus Summit Rim
Erd is 388.8 mm and im not sure what size spoke to get, help?
Chuck says
Eclat E440?
Kurt says
Just waiting to find out the ERD (effective rim diameter) and then we can add it. Do you happen to know that number?
M says
I have an Eclat cortex hub I would like to lace to an Odyssey Hazard lite rim. What length spokes do i need? Thanks!
raphael dubacq says
Hello i have the foundation hub freecoaster and i have the gs sport birdcage
Thanks for your help
Pef Unleaded says
Hey,
You will need some 180mm spokes with a 3x lacing pattern.
The Foundation hub has the same dimensions as the Federal / Primo Freemix
Ewan says
Do you know what spoke length i need for an exposure hub laced to an alienation skylark rim please
Brett says
Any idea what the dimensions on the primo remix v3 are?
Steve says
Hi. I’m looking at fitting a colony clone freecoaster hub to a Alex box rim VP 18 16×1.75 36h. Can you tell me what size spikes to use?
matt says
Fly Bikes Classic REAR rim please (the old one, not Lunar) please
Can’t find it anywhere and got 2 sets of these rims 🙁
thank you
jones says
can you add Premium Samsara rims please?
Kurt says
Is the Samsara a complete wheel? Not finding details on the rim.
jones says
it is, i’m trying to replace the spokes and don’t have the old ones to compare, thanks anyway
jones says
can you add Premium Samsara rims ?
Omar Sulaiman says
Hey I’ve got a bsd swerve cassette hub for the rear and an eclat blind front hub. the rims im using are alienation tcs vandal rims. what size spokes do i need?
Ben says
Cinema FX2 freecoaster hub and mission engage hub. Also mission x7 rim
Eman says
Any chance of getting the new Eclat Seismic hubs added? The front is 36h, PCD: 38mm, Flange Offset: 26.75mm. But I can’t find any info on the rear. I’d love to lace up a new set at home for more experience but I’m no math wizard to figure out spoke lengths.
Eman says
Just heard back from Elcat about the Seismic cassette:
PCD: 45mm NDS
PCD: 51.5 DS
Flange (outside): 55.89mm
Maybe this helps? I only sort of understand what I’m looking at here.
Kurt says
Hey Eman,
I’ll email them and get some other details. Essentially I need the flange diameters and the offset (Flange to center of hub) on both sides and the spoke hole size. It looks like they gave you flange diameters and the length from flange to flange.
Eman says
Thanks Kurt, you rock!!
Colin says
It would be helpful if primo’s new remix v3 was on here, also if you could look into alien nation’s black sheep rim, here it says the ERD is 190, but some other sites say 195, though I’m not sure how big of a difference that is, I feel like it should be pointed out
Colin says
I meant 390mm and 395mm
Lazlo says
Got GT 32 hole hubs from a Power Series, can I do a hollow axle conversion?
Lukas says
Would be helpful if there was a kink Yukon hub on the list plz and thank you
Dan says
Interested in seeing the Free Night Planetary coaster on this list. Seems like it’ll be a popular option now
Kurt says
Added to the list.
Don Sunderland says
TSC Rant 22” Rim needs added
Kurt says
Do you know the ERD? Can’t find it listed anywhere.
Brett says
We the people helix front hub please. Want to lace it to a odyssey hazard lite.
Thanks
Just_walter says
Sadly there isnt eclat camber rim
Kurt says
Added. Sorry for the delay.
James says
The stranger Crux V2 freecoaster hub is not on here ?
Monta says
What about 48 holes ? I’d like to calculate Odyssey V3 casette hub and Odyssey Hazard Lite (both 48 holes version). Thanks !
Tony Hawkins says
So if my non-drive side is 188 mm but my drive side is 186 mm do I order 18 of each size or could I go in the middle and get 36 187 mm or just get all 188 mm or 186 mm
Jacob says
I have khe greyhound 14mm axle not female and shadow Corvus. Didn’t see the khe greyhound on there.
Wezley says
Hi could you add the Primo balance front and rear hubs to the list please?
Albert says
I have an old primopro small flange front hub, the one that matched the very first primopro cassette the one before the mix v1, that is laced to an odyssey hazard lite rim. Need to know exactly what length the spokes are thanks!
Donald says
Could you add the Sunday Lightning 20″ Rim?
Kellen says
Could you add the 20″ version of the Revenge Arc rims, the ERD is 390mm.
James says
Any chance of getting the Far East Cycles hubs added?
mattybmx says
shadow symbol front and rear hubs and shadow optimized freecoaster hubs would be nice to add to your list. THANKS!
Jake says
Cinema c38 size is WRONG. Ordered spokes too long as a result. It’s listed as erd 396 but cinema site lists it as 391mm.
joe says
Eclat Blind front hub
Michael says
For the demolition rolls 2
Flange diameter.. Driveside-51.5
Non drive side 45mm
Can u plz post. I have the demolition rolls 2 laceing to a primo 7005. Thanks theres the info the the slot missing thanks
liam says
saltplus vertex freecoaster isnt here
Isaac says
Colony Pintour Rim + Stolen Easy Street Freecoaster?
Rimvydas says
Stranger Ballast Front Hub, Please
Chris says
Can you add the Saltplus PRO freecoaster, and the saltplus Summit straight double wall please.
Roger G. says
Please help me with Bombshell SL Pro 20×175 rims! Lacing to BOX 20mm front and rear!
Chad Oliver says
Subrosa Rant Squad rims new and cheapest on market
Chad Oliver says
Hey Rant Squad rims from Subrosa brand new cheapest ones on the market. Would be very helpful thanks
Scott says
The ERD for the G-Sport Birdcage is incorrect. It should be 383, not 390. All three G-Sport rims have a different ERD.
Kurt says
Hey Scott! Thank you! I have all three corrected. Those were a few that were already on the calculator when I was given it, so I assumed they were correct. That was my bad. I appreciate you letting me know!
Larry says
SORRY:! what NIPPLE length does this account for?
Thank you,
Midschool bmxer
Larry Miller
@laxonthree
Larry says
WHAT SPOKE LENGTH DOES THIS ACCOUNT FOR?
Thank you,
Midschool bmxer
Larry Miller
@laxonthree
Lucas Guironnet says
I don’t find the shadow symbol cassette hub
Kurtis Kunz says
Hello,
Wondering if the spoke length for the Madera Pilot front hub on the list is for the V2 or if the one listed and the V2 are the same length.
Thanks!
~Kurtis.
Kurt says
I have updated the calculator to include the Pilot V2 hub for you!
Kurtis Kunz says
Thank you, Kurt!
Brandon says
BSD FRONT STREET hub and REAR COLONY WASP CASSETTE hub
Kurt says
I’ll get on this and see what I can find out. A lot of it comes down to brands getting us the dimensions of the hubs.
Kurt says
Updated with BSD Front and Colony Wasp Cassette
Graham Chown says
Fiend cab flangeless front?
Bryn says
Odyssey quartet hubs, front and rear. Bsd backstreet rear cassette.
Eastern hoops both throttle and nitrous.
Thanks.
Kurt says
Added. Sorry for the delay!
Rueben says
Hey, what’s the measurement for a FlyBikes Trebol Bueno Cassette Wheel, with the FlyBikes pyramid 2 Rim? You’ve already got the pyramids 2 Rim, but not the hub. Thanks so much!!
Rueben says
Hey, I was just wondering, what’s
The measurement for the FlyBikes Trebol Bueno Cassette hub, and the Fly Piramide 2 Rim.. you have the Fly Piramide 2 Rim, but not the Fly Trebol Bueno Cassette, is this because its recent? Just wondering if you can add it in, thanks!!’
Ike says
Im goin to the old skool cuz i still ride 48 spokes LOL Primo SOB front hub and odyssey ribcage rim?
Got more but cant think of em now. Ill b in touch!
Michael says
Can you add the stranger XXLT rim please.
Ventura says
I need help with a cult v2 freecoaster to a stolen revolver rim
Bodhi says
What size spoke would I need for a cinema 777 going to a United Supreme Male Cassette Hub
Oli Slick.
Kurt says
I’ve added the United Supreme Cassette. 190mm for 3x with the Supreme laced to a 777.
Kurt says
The Supreme front hub is also available now.
Brandon says
Front: Hub, BSD Front street hub. Rim, Federal Stance XL Rim
Rear: Hub, Colony Wasp cassette hub. Rim, Federal Stance XL Rim
Bodhi says
The United Supreme Female Front hub is not on here.
Bodhi says
The United Supreme Female Front hub is not on here same with the United Supreme Male Cassette hub may you please fix that.
Tori says
Eclat Kolibri front Hub please
Detonate says
Can you please add the bombshell line of rims, to the calculator? I have the bombshell sl pro plus, which is a 36 hole 24″x1.75″ rim?
Thank you!!
Dong says
Some different measurement from profileracing website. For profile mini rear hub: drive flange diameter: 54. Non-drive flange diameter:43. Drive flange offset:28. Non-drive flange offset:33. Spoke hole diameter:2.5. Please update new measurements for them.
Kurt says
Thank you, Dong! I’ve updated the Profile Mini Cassette with the current measurements.
Korey says
Can you add the Sunday Cyclone Freecoaster to the list or let me know what size spokes I would need to fit an Odyssey Hazard Lite? I haven’t seen it on any spoke websites and I’m wondering if it’s because the hub is recent.
Kurt says
Hey Korey, I have added the Sunday Cyclone freecoaster hub, along with the Odyssey Clutch V1 and V2 since all three use pretty much identical hub shells (similar internals, too). Hope this helps!
dirty tony says
kurt dizzle!,
box hollow hubs 36h and box focus rims1.75 36h
Kurt says
We don’t get too into the Race world, but luckily Box is good about listing all their specs on their website. I’ve added the Box Hollow Hubs (front and rear) and Focus rims for you.
CHRIS WILCZEK says
SPOKE LENGTH FOR BULLSEYE 36H HUBS TO ARAYA 1.75 20” RIMS. THANK YOU. POLSKA!!!!! TO NASA!!
Jamie Morris says
Hi guys, i need a spoke size for a salt trapez cassette with a Trébol single wall rim.
Kurt says
Hey Jamie,
I’ll look it up and get it added in! Thanks!
Kurt says
Updated to have those two in there. The Trebol rim is actually a double wall as well.
Luke says
it’s very nice you have provided this page but totally sucks since there’s no option to solve or update entered selection, rendering it completelyuseless.
Kurt says
Hey Luke, we’re working on updating the list. What hub and rim are you looking for? Once we have what people need, we can find the numbers we need for it.
michael courteau says
Hello i have a Hub Eastern Rear 9t is white hub no idea of the model !!!
i have a alienation 440 what size spokes do i need ??
Kurt says
We would need to know the model of the hub since all vary so much. If you can figure that out, we can get the flange diameters that we would use to calculate it.
Don says
need ERD for Stranger XXL rim.
Crux ERD is 386mm
dee says
deez nuts
Kurt says
Gonna need more than a Spoke Calculator to find those tiny nuggets.
Joel says
Eclat Dynamic V3
David says
Please add 22″ Revenge ARC rims to the calculator. The ERD is 440mm. Thanks!!
michael courteau says
TotalBmx all hub NOT in the list 🙂 thanks you
and my rims are Alienanion 440 – or Alienation runaway – is on the list for this one is Corect 🙂
i lace it to a
REAR HUB = i know is 182mm drive side to a 184mm non drive side spoke 3 cross ==
But Front HUB ??? iam not sure is 186mm for 3 cross on the two side
Kurt says
We will get that added in for sure. Thanks!
Kurt says
Added the Total BMX hubs in. Getting a different result than what you said works. Which rear hub are you using?
michael courteau says
iam using Total tech female v1 i think