Are you on the hunt for some new BMX cranks? Are you worried about bending or breaking cranks? Well, maybe Dennis Enarson’s signature Rig cranks from Demolition Parts are what you’re looking for. These cranks start out with heat-treated chromoly arms with a built in ridge face for increased strength and stiffness with a forged spindle boss that sits flush to prevent ankle bite. The arms attach to a 24mm, 48-splined heat-treated chromoly spindle with chromoly spindle bolts that use a 3/8″ ratchet or 6mm allen key to tighten them down. Another perk is that each set of cranks come with a 24mm Mid Bottom bracket set (bearings, cones and washers).
The Rig cranks come in sizes of 170mm and 175mm, right and left side drive compatible, colors of black and chrome and a weight of 31.6 oz. (175mm). These crank are currently available worldwide through all shops and mail-orders that carry Demolition Parts worldwide.
More photos after the jump.
The Rig cranks are regular and micro-drive compatible as well as right and left side drive compatible.
Beeft and shiny.
The crank bolts are designed to use a 3/8″ ratchet or a 6mm allen that is inside the bolt hole.
Beefy 24mm, 48-spline spindle and every set of cranks come with a 24mm Mid bottom bracket kit so you’re good to go right out of the box.
You can find out more about Demolition Parts and their products by visiting their website — DemolitionParts.com
This website uses cookies.