We don’t see a ton of changes with the product line from Profile Racing because they’re pretty consistent on sticking with what works! But, every few months, we do get to see a new limited edition colorway from them that is always ends up real good. This time around, they have released a very limited run of these Zach Rogers inspired matte Desert Camo Mini and Elite hubs, Push stems and Spline Drive and Galaxy sprockets that are are available now! We figured with only 50 sets of hubs total and 10 of each of the stems and sprockets available, these are going to go quick so we should take a look before they’re all gone, right? Let’s check this out!
First up, we have a look at the new matte Desert Camo colorway on the classic Mini hubs. These hub shells are made right here in the U.S.A out of CNC machined 6061 aluminum with a low flange design, inside you can fired two precision sealed bearings and a one-piece, 4-pawl chromoly driver. The Mini hubs can be customized to your liking with your choice of an aluminum or steel female axle with 3/8″ chromoly or titanium bolts, or 17mm hex head chromoly bolts. The rear hub is available in left or right side drive with your choice of 9-18 tooth drivers in chromoly, aluminum or titanium with a 14mm GDH chromoly axle or an aluminum or steel female center axle.
The new matte Desert camouflage Mini hub sets are available starting at $349.95 in the Profile Racing Webstore or you can have your local shop get ahold of Profile Racing directly to get you a set ordered up today!
Next up we have the Elite hubs. Like the Mini hubs, these are made right here in the U.S.A out of CNC machined 6061 aluminum. Inside you can find two precision sealed bearings in the front and 5 precision sealed bearings between the hub and driver in the rear. The driver features 6 pawls with 204 points of engagement on a ratchet ring creating instant engagement. The Elite hubs can be customized to your liking with an aluminum or steel female center axle with chromoly or titanium bolts up front and a 14mm GHD chromoly axle or a aluminum or steel female center axle with your choice of chromoly or titanium bolts. These are available in right side drive only with 9 or 10 tooth drivers in chromoly or titanium or with aluminum or titanium cogs in 12-18 tooth sizes.
The matte Desert Camo Elite hubs are available starting at $484.95 in the Profile Racing Webstore or you can have your local shop get ahold of Profile Racing directly to get you a set ordered up today!
Next up, we have the Spline Drive and Galaxy sprockets. Both of these hubs are CNC machined right here in the USA out of 7075 aluminum. The Spline Drive sprocket features a split 5 spoke design with a 19mm, 48 spline chromoly insert and comes in sizes of 25 or 28 tooth. The Galaxy sprocket features a split 3 spoke design with offset 1/8″ teeth for improved chain alignment, chamfered edges for a clean look with a 22mm, 48 spline chromoly insert and sizes of 25 or 28 tooth.
These sprockets are available for $76.95 each in the Profile Racing Webstore or you can have your local shop get ahold of Profile Racing directly to get you one ordered up today!
The final piece to the new matte Desert camo colorway… The Mark Mulville signature Push stem. This top load stem, like all of Profile Racing’s products, is CNC machined right here in the U.S.A with extra machining to help reduce weight, chamfered edges and a concaved back for a clean look. The stem has a 31.7mm site (1.3mm inverted), a 33mm stack height and comes in your choice of 48mm or 53mm reach.
This colorway isn’t available just yet in the Profile Racing Webstore, but you can have your local shop get you one ordered up by getting ahold of Profile Racing today!
So that’s a look at Profile’s latest color addition! As always, it turned out real good and I’m sure a bunch of you are stoked on it. Let us know what you think in the comments!
You can find out more about Profile Racing and their products on their website — ProfileRacing.com