Saturday already? Where time goes, I don’t know! Either way, it’s that time again for a fresh round of Products:! This week we’ll take a closer look at the Lahsaan Kobza signature Chula Upload stem from The Shadow Conspiracy, the Freedom Bars from Freed Bikes, the City front hub from The Daily Grind, The new Stock V2 Cassette wheel from Madera then we’ll wrap things up with the Agua fork from Flybikes! Ready? Let’s do this!
Are you looking for a little lift in the front end? Check out Lahsaan Kobza’s signature Chula Upload stem. This stem is CNC machined from 6061-T6 alloy with a 53mm reach, 32mm stack height, 33mm rise (1mm drop inverted) with extra machining in the front for weight savings without sacrafising strength, chamfered edges, a recessed top for a flush compression cap and engraved Shadow Conspiracy logos on the sides for a little aesthetic bonus! The Chula Upload stem weighs in at 11 oz. with colors of black, polished, Perma blue, white, copper, crimson red, purple, copper tye die and purple tye die.
The Chula Upload stem is available for $59.99 on Dan’s Comp or you can have your local shop get ahold of Sparky’s Distribution to get you one ordered up today!
You can find out more about The Shadow Conspiracy and their products by visiting their website — TheShadowConspiracy.com
Is it time for some new bars? Have you given the Freedom bars from Freed Bikes a look yet? These bars are made right here in the U.S.A from 4130 chromoly with a rise of 8.5″, 28″ width, 12-degrees of back sweep, 2-degrees of upsweep, a 6.25″ crossbar height and a 10.625″ crossbar width. The Freedom bars are available in black, Rasta green, red, aqua, raw and a special Matte black that comes with a 29″ width.
The Freedom bars are available for $59.95 in the Freed Bikes Webstore or you can have your local shop get ahold of them directly to get you a set ordered up today!
You can find out more about Freed Bikes and their products by visiting their website — FreedBikes.com
Has that front hub of yours called it quits? Maybe you could use something new like The Daily Grind‘s City hub. This hub starts out with a CNC machined aluminum hub shell with reinforced flanges to help protect your spokes and lased-etched logos. Inside you can find two precision sealed bearings with a 15mm chromoly female axle and a two chromoly 3/8″ bolts with 17mm heads. The City hub weighs in at 9.1 oz. with black for the color!
The City hub is available for $63.99 on Dan’s Comp or in The Daily Grind Webstore. You can also have your local shop get ahold of The Daily Grind directly to get you one ordered up today!
You can find out more about The Daily Grind and their products by visiting their website — TheDailyGrindBMX.com
Is it getting to that time where your rear wheel has been through enough and it’s time to start over fresh? Check out the new Stock V2 Cassette wheel from Madera! This wheel started out with Madera’s V2 Cassette hub in left or right side drive with a 14mm GDH axle and 9-tooth driver that is laced to a black Sun Ringle Big Baller rim with black Deco 14 gauge steel spokes and aluminum nipples. There’s also a Deco rim strip included! This wheel comes with hub color options of black, polished, nickel, matte red, matte raw and Rust orange with a weight of 2.7 lbs. (43.2 oz. / 1215g).
The Madera Stock V2 Cassette wheel can be picked up for $226.95 in the Madera Webstore or you can have your local shop get ahold of Profile Racing to get you one ordered up today!
You can find out more about Madera and their products by visiting their website — MaderaBMX.net
You put a lot of abuse on a fork, so it’s always a good idea to be running one you can trust. The Agua fork from Flybikes is made from heat-treated seamless 4130 chromoly tubing with a 155mm long, internally and externally CNC machined one-piece steerer tube, triple butted and tapered legs, heat-treated Investment Cast drop outs with a 32mm offset and a 7075-T6 aluminum CNC machined top bolt. The Agua fork comes in colors of black and stainless with a weight of 2.11 lbs. (961g).
The Agua fork is available for $129.99 – $138.99 on Dan’s Comp or you can have your local shop here in the U.S get ahold of Tip Plus or QBMX to get you one ordered up today!
You can find out more about Flybikes and their products by visiting their website — Flybikes.com
That wraps up the 127th edition of Products:! Check back next Saturday for 5 more dialed BMX products you might just want or need! Until then, go check out more of our Originals or hit up the Daily Section for all the latest BMX videos, news, products and more!
Want more Products:? Check out past editions below!
This website uses cookies.