It’s November 1st, I’m sure some of you are nursing a little hangover from the festivities of Halloween or gearing up for another round tonight.. Or you’re probably good to go for a session on your bike! It’s Saturday so that means it’s time we take a little time to check out 5 dialed BMX products you might just want or need! For this go around, we’re going to take a closer look at the Kyle Hart signature Party bars from Subrosa, the Millennium guard sprocket from The Daily Grind, the V2 Pilot front hub from Madera, the Tractor chain from Flybikes, then we will wrap things up with Dakota Roche’s new signature Dak frame from Cult! Ready? Let’s do this!
If you’re looking for a good time, then maybe Kyle Hart’s signature Party bars from Subrosa are just what you need! These bars are made from 100% heat-treated straight gauge tapered 4130 chromoly tubing with a 8.5″ rise, 28″ width, 12-degrees of backsweep and 1-degree of upsweep. These bars have a butted crossbar and an anti-rust ED coating with masked knurling so your stem can clamp tight. The Party bars come in colors of matte black, money green, Dr. Maroon, Party Splatter yellow and chrome with a weight of 34.8 oz.
The Party bars are available for $75.99 – $85.99 on Dan’s Comp or you can have your local shop get ahold of Sparky’s Distribution to get you a set ordered up today!
You can find out more about Subrosa and their products by visiting their website — SubrosaBrand.com
Is it time for a new sprocket, but you want something that will protect your chain and sprockets teeth? Check out the Millennium sprocket from The Daily Grind! This sprocket is made from CNC machined 7075 aluminum with a split 5-spoke design and integrated guard with Daily Grind logos machined around the outside. This sprocket has a 22mm bore with a 19mm adaptor includes, comes in sizes of 25 and 28 tooth, colors of black, purple and red with a weight of 4.6 oz. (25t).
The Millennium sprocket is available for $54.99 on Dan’s Comp or for $62.99 in The Daily Grind Webstore. You can also have your local shop get ahold of The Daily Grind directly to get you one ordered up today!
You can find out more about The Daily Grind and their products by visiting their website — TheDailyGrindBMX.com
Has that front hub of yours seen better days? Maybe it’s time to give it an upgrade. Check out the Pilot V2 front hub from Madera. This hub is made right here in the U.S.A! The shell is made from a CNC machined alloy with low flanges that are designed to help protect your spokes with a laser etched Madera logo, inside you can find a hallow aluminum center axle and two precision sealed bearings with aluminum cone washers and 3/8″ chromoly bolts to keep it all tight.
The Pilot V2 hub is available for $79.99 on Dan’s Comp or for $86.99 in the Madera Webstore with customization options or you can have your local shop get ahold of Profile Racing to get you one ordered up today!
You can find out more about Madera and their products by visiting their website — MaderaBMX.net
When was the last time you replaced your chain? Maybe it’s time to get yourself a new one. The Tractor chain from Flybikes is a full-link chain with extra thick 1.3mm thick plates and hollow chromoly pins with a chromium heat-treatment and a built-in half link to ensure a perfect fit for any gear ratio and a master link for easy installation. The Tractor chain comes in colors of black and silver with a weight of 11.4 oz. (325g).
The Tractor chain is available for $22.99 on Dan’s Comp or you can have your local shop here in the U.S get ahold of Tip Plus or QBP to get you one ordered up today!
You can find out more about Flybikes and their products by visiting their website — Flybikes.com
Time for a new frame? Check out the new Dakota Roche signature Dak frame that is made from revised 100% Cult Classic chromoly tubing with a 75-degree head tube angle, 71-degree seat tube angle, 11.8″ bottom bracket height, 9.25″ stand over height and a 13.50″ – 13.80″ chain stay length. This frame features a Cult logo embossed top tube gusset, a Dak logo embossed down tube gusset, an externally machined Mid bottom bracket shell, an Investment cast septets clamp, an Investment cast seat stay bridge, tapered seat stays, S-Bend chain stays to fit the 2.40″ tires, 5mm thick heat-treated drop outs, removable brake mounts on the seat stay and Dakota Roche inspired graphics. The Dak frame is available in 20″, 20.5″, 20.75″, 21″ and 21.25″ top tube lengths with black and brown for the color options.
The Dak frame is available for $329.99 on Dan’s Comp. You can also get yourself one of these frames ordered up by having your local shop here in the U.S get ahold of Tip Plus (West Coast), Greenhouse (Midwest) or Animal Bikes (East Coast). If you’re outside of the U.S, check out Cult’s worldwide list of distributors right here!
You can find out more about Cult and their products by visiting their website — CultCrew.com
That wraps up the 129th edition of Products:! As always, check back next Saturday for 5 more dialed BMX products! Until then, go check out more of our Originals or hit up the Daily Section for all the latest BMX videos, news, products and more!
This website uses cookies.