Categories: blog

Products: Vol. 74

The week before Interbike always gets a little crazy. It’s one of the busiest weeks for the BMX industry and you better believe I’ve been getting ready to go and check out and post up all of the products that are coming out for 2014. However, there’s a few days until that goes down and today is Saturday… So you know that means we’ve got a fresh round of Products for you to check out! This week we’re going to take a closer look at the Ryan “Biz” Jordan signature Rotator freecoaster from Demolition, Tom Dugan’s signature Dugan bars from Fit Bike Co., Hoang Tran’s signature Villicus fork from Subrosa, the Classic logo hoodie from Freed Bikes, then we’ll wrap things up with the 2014 Forum complete from Diamondback UK! Let’s get into it!

Freecoasters have been a hot commodity in BMX lately. Demolition and Ryan “Biz” Jordan have this fresh new Rotator freecoaster hub for you guys to take a closer loo at. This hub starts out with a 6061-T6 aluminum shell with a 14mm heat-treated chromoly axle. You can find a 1-piece chromoly driver with an ACB bearing on the drive side to give it a little more support and a sealed bearing on the non-drive side, a thrust needle bearing to help reduce drag and 3 slack washers to allow you to get the perfect amount of play for you. The Rotator comes in black and polished with a weight of 23 oz.

The Rotator isn’t out just yet, but you can get a pre-order in on the hub by having your local shop hit up 180 Distribution today!

To find out more about Demolition and their products, check out their website — DemolitionParts.com

Thinking it’s time for some new bars? Looking to roast just like Tom Dugan? Check out the Dugan bars from Fit Bike Co.. These bars are made right here in the U.S.A from 100% 4Q Baked heat-treated 4130 chromoly straight gauge tubing. These bars have a rise of 8.45″, 28.5″ width, 12-degrees of backsweep and 1-degree of upsweep. You can find dual radius bends for increased strength on these bad boys as well. The Dugan bars come in red, matte black, chrome and green with a weight of 2 lbs. even.

You can pick the Dugan bars up for $59.99 on Dan’s Comp or you can have your local shop hit up The Building Distribution to get you a set ordered up!

To find out more about Fit Bike Co. and their products, check out their website — FitBikeCo.com

Time for a new fork? Have you checked out Hoang Tran’s signature Villicus fork? This 4130 Sanko chromoly butted and tapered tubing is 100% post-weld Deathproof heat-treated and a features a 160mm 1-piece steerer tube with cut lines, recessed threads and an integrated race, 4mm thick 3/8″ drop outs with a 30mm offset, a Villcius brazed on logo, an ED anti-rust coating and a 6061 alloy top cap. The Villicus fork comes in matte black, translucent orange, matte gun metal gray, chrome, crispy cream, Space black, Dr. Maroon, Money green and Party Splatter and a weight of 32.9 oz.

You can pick this fork up for $139.99 – $145.99 on Dan’s Comp or you can have your local shop hit up Sparky’s Distribution to get one ordered up today!

To find out more about Subrosa and their products, check out their website — SubrosaBrand.com.

With the cooler weather starting to kick in, in the northern hemisphere, it’s a good time to pick up a fresh hoodie to keep you warm during the last few sessions outside (for those of us who are going to see temps really drop). Maybe you should pick up the Freed Bikes Classic Logo hoodie. This heavy weight hoodie features the Classic Freed logo screen printed on the back and a stitched on logo patch in the front. You can pick this up in black with sizes of medium and large.

You can get the Classic hoodie for $32.95 on the Freed Bikes web store or by having your local shop hit up Freed Bikes directly to get you one ordered up today!

To find out more about Freed Bikes and their products, check out their website — FreedBikes.com

Just starting out and looking into getting a dialed complete? Have you seen the 2014 Forum complete from Diamondback UK? This bike starts out with a full 4130 butted chromoly frame with gussets on the top and down tube, removable brake mounts, an integrated seat post clamp and integrated head tube, a full 4130 butted chromoly fork with tapered legs and chromoly bars. You can find Diamondback 3-piece, 48-spline cranks, a Mid sealed bottom bracket, CNC machined 25 tooth alloy sprocket, a half-link chain, the MX dual clamp stem, Viper grips, and the Mid OPC seat and post combo. There’s also Odyssey Chase Hawk 2.20″ tan wall tires and Alienation 440 and Primus rims laced to sealed Diamondback hubs.

You can pick this bike up for £475.00 direct from the Diamondback UK webstore or by checking out one of their Dealers in the U.K.

You can find out more about Diamondback U.K and their products by visiting their website — Diamondback.co.uk/BMX/

That wraps up this weeks edition of Products! Check back all week starting Wednesday for our full coverage of Interbike in Las Vegas for all the latest products from all of your favorite BMX brands! Until then, go check out more of our Originals or hit up the Daily Section for all of the latest BMX videos, news, products and more!

Want more Products? Check out past editions below!

This website uses cookies.