It’s that time of the week again for us to get a closer look at 5 dialed BMX products you might just need for your bike! This week we’ve got all sorts of goodness to check out. We’ll start things off with the Wand V3. fork from Mutiny Bikes, then we’ll check out Alex Kennedy’s signature OS V3. frame from Cult, then get a look at the affordable Freeze top load stem from Sunday Bikes, get our hands on the Alex Raban signature Iron Chachi bars from Volume Bikes, then we’ll wrap things up with the Kraken helmet from TSG. Ready? Let’s do this!
So you need yourself a new fork? Have you checked out the 3rd version of the Wand fork from Mutiny Bikes? This 33mm offset fork is made from 4130, multi-butted chromoly and is fully 420 heat-treated. You can find features like a one-piece butted steerer tube with a built in bearing race, extra trie clearance for tires up for 2.425″ wide, an improved steerer tube and leg junction for increased strength, 5mm investment cast hollow drop outs and a 6061 pre-load bolt that fits 6mm allen key’s. The Wand V3. fork comes in black, raw and chrome with a weight of 34 oz.
You can pick the Wand V3. fork up for $134.99 on Dan’s Comp or you can have your local shop here in the U.S hit up Sparky’s Distribution to get you one ordered up today!
You can find out more about Mutiny Bikes and their products by visiting their website — MutinyBikes.com
Have you seen the new Alex Kennedy signature OS V3. frame from Cult? This frame starts out with a 100% 4130 chromoly tubing with a 75-degree head tube angle, 71-degree seat tube angle, 11.8″ bottom bracket height, 8.75″ stand over height and a 13.55″ – 13.875″ chain stay length. You can find a tapered top tube, gussets on the top and down tubes, an externally machined Mid bottom bracket, tapered seat stays, s-bend chain stays with plenty of clearance for those monster truck tires, curved stay bridges, 5mm thick heat-treated dropouts, an integrated seat post clamp and removable brake mounts. The frame weighs in at 5 lbs. 4.6 oz. with black or Indigo for color options.
You can pick Alex Kennedy’s signature OS V3. frame up for $299.99 on Dan’s Comp or you can have your local shop here in the U.S hit up Tip Plus (West Coast), Greenhouse (Midwest) or Animal Bikes (East Coast) to get you one ordered up today.
To find out more about Cult and their products, check out their website — CultCrew.com
Due for a new stem but you don’t have a bunch of cash to drop? Have you checked out the Freeze top load stem from Sunday? This die-cast aluminum stem with a forged 6061-T6 aluminum top plate has a reach of 52mm, stack height of 33mm and a rise of 34mm (1mm when inverted). You can find 6 bolts between the top plate and the pinch bolts on the side. The Freeze comes in colors of black, raw, polished, Watermellon green, blue, red, Vapor blue, Florescent yellow and white with a weight of 10.5 oz.
You can pick the Freeze topload stem up for $24.99 – $29.99 on Dan’s Comp or you can have your local shop hit up Full Factory Distribution to get you one ordered up today!
To find out more about Sunday Bikes and their products, check out their website — SundayBikes.com
Want some new bars to go with that stem? Take a look at Alex Raban’s signature Iron Chachi bars from Volume Bikes. These two-piece bars are made from 13-butted, heat-treated 4130 chromoly. You can find a rise of 8.3″, width of 29″, 12-degrees of backsweep, 2-degrees of upsweep, a 6.2″ crossbar height and 10.4″ crossbar width. The Iron Chachi bars are available in chrome and flat black with a weight of 29.4 oz.
You can pick up a set of the Iron Chachi bars by having your local shop hit up 180 Distribution today!
To find out more about Volume Bikes and their products, check out their website — VolumeBikes.com
Let’s face it… Helmets are very important. Regardless if it’s the cool thing to do or not, it’s always a good idea to wear one. If you’re going to wear one, you might as well have one that fits right, is held to high impact testing standards and looks cool, right? The TSG Kraken helmet is all of those things. It starts out with a high density injected ABS shell that has a low fit with lightweight EBS impact foam on the inside that adapts itself and flexes for improved fit and comfort, 14 vents for plenty of air flow to keep you cool and a 3-point chin strap adjustment. This helmet is EN1078 and CPSC certified as well so you know it’s safe. The Kraken is available in small / medium and large / extra large with flat black and black with Shetface graphics.
You can pick the Kraken helmet up for $59.99 – $64.99 (On sale for $39.99 as I write this) on Sidewall Distribution to get you one ordered up today!
You can find out more about TSG and their products by visiting their website — RideTSG.com
That wraps up the 79th edition of Products:! Check back next Saturday for the 80th edition with five more dialed BMX products for you to check out. Until then, make sure you check out more of our Originals or hit up the Daily Section for all the latest BMX videos, news, products and more!
Want more Products:? Check out past editions below!
