The days just keep on cruising by! It’s Saturday again, and that means it’s time to take a look at 5 dialed BMX goodies that will help keep your sessions going strong! This week we’ll take a closer look at the BTR hub from The Shadow Conspiracy, the Stratos stem from Stolen Bikes, the Knox guard sprocket from Sunday, the Badge pivotal seat from Madera, then we’ll wrap things up with Chase DeHart’s signature Butter frame from Cult. Let’s get into it!
Is it time for a new hub? Give the BTR hub from The Shadow Conspiracy a look. This hub starts out with a 36-hole CNC machined 6061 aluminum shell. Inside you can find a 17mm nickel-chromoly female axle with 3/8″ chromoly bolts, 2 oversized sealed bearings for smooth rolling and a 1-piece 9-tooth chromoly driver with a polymer bushing. This hub comes in left or right hand drive with colors of black, matte white, crimson red, purple, Deep Six blue, raw polish, Perma blue and copper and a weight of 17.3 oz.
The BTR hub is available for $164.99 – $184.99 on Dan’s Comp or you can have your local shop hit up Sparky’s Distribution to get you one ordered up today!
You can find out more about The Shadow Conspiracy and their products by visiting their website — TheShadowConspiracy.com
Looking into a new top load stem? Here’s a look at the Stratos stem from Stolen! This stem is forged from 6061 aluminum with a cold forged face plate with an embossed Stolen logo for extra strength, recessed sides and a bottom section for a clean look along with weight savings, a recessed top for a flush compression cap and 6 hollow bolts to keep it all tight. The Stratos has a reach of 52mm and rise of 35mm (2mm drop inverted) with colors of black, silver, white, red and dark blue and a weight of 10.7 oz.
The Stratos top load stem is available for $29.99 on Dan’s Comp or you can have your local shop here in the U.S hit up QBMX to get you one ordered up today!
You can find out more about Stolen and their products by visiting their website — StolenBMX.com
Are you looking for a guard sprocket, but need something that works with your half-link chain? Take a look at Sunday‘s Knox sprocket. This 6mm thick, full-guard sprocket is CNC mached from 7075 aluminum with a 5-spoke pattern for a rad look and some additional weight savings, 1/8″ teeth, a 15/16″ bore with 19mm adaptor, and 5-sprocket bolt holes to give you plenty of life from the sprocket. The Knox comes in 25 and 28 tooth sizes, colors of black, raw, anodized red and anodized blue with a weight of 5.1 oz. (25t)
The Knox guard sprocket is available for $49.99 on Dan’s Comp or you can have your local shop hit up Full Factory Distribution to get one ordered up today!
You can find out more about Sunday Bikes and their products by visiting their website — SundayBikes.com
That seat of yours seen better days? Maybe it’s time to pick yourself up a new one! Here’s a look at Madera‘s Badge pivotal seat that just might be what you’re looking for! This is a medium width seat with plenty of padding and a full Kevlar cover that helps to resist tearing and ripping with a Madera “M” logo stitched on. Below you can find plastic bumpers along the back and nose for even more protection. These seat comes in black only with a weight of 9.6 oz.
The Badge seat is available for $34.99 on Dan’s Comp or for $29.95 through the Madera Webstore. You can also have your local shop hit up Profile Racing to get you one ordered up today!
You can find out more about Madera and their products by visiting their website — MaderaBMX.net
On the hunt for a new frame? Have you given Chase DeHart’s signature Butter frame from Cult a look yet? This frame is made from Cult’s classic blended chromoly with a 75-degree head tube angle, 71-degree seat tube angle, 11.8″ bottom bracket height, 8.5″ stand over height and a 13.55″ – 13.875″ chain stay length. This frame has gussets on the top and down tubes, a tapered top tube, a butted seat tube, single bend chain stays making room for those monster truck tires, an investment cast seat stay bridge, heat-treated drop outs and an integrated seat post clamp. This frame does NOT have brake mounts. The Butter frame comes in top tube sizes of 20.4″, 20.6″, 20.65, 20.9″ and 21.25″ with black, chrome, grey and white for colors and a weight of 5 lbs. 2oz.
The Butter frame is available for $249.99 – $304.99 on Dan’s Comp or you can have your local shop here in the U.S hit up Tip Plus (West Coast), Greenhouse (Midwest) or Animal Bikes (East Coast) to get your hands on one today!
You can find out more about Cult and their products by visiting their website — CultCrew.com
That wraps up the 96th edition of Products:! Check back next Saturday to see what the 97th round has in store! Until then, go check out more of our Originals or hit up the Daily Section for all the latest BMX videos, news, products and more!
Want more Products:? Check out past editions below!
This website uses cookies.