I’m about to head down to the 2014 BV Jam, but there was no way I could start a Saturday off without a fresh round of Products:! For the 97th round, we’ll take a closer look at The Shadow Conspiracy‘s Corvous rim, Profile Racing‘s Spline Drive sprocket, Sunday‘s EX Aaron Ross complete bike, Scott Ditchburn’s new signature Thunderbeast frame from Subrosa and then we’ll wrap it up with a look at the 4140 shirt from The Daily Grind. Ready? Let’s do this!
Has your wheels seen better days? Does your rim have more hops than a double IPA beer? Well, maybe it’s time you get yourself some fresh rims. The Shadow Conspiracy‘s new Corvus rim might just be what you’re looking for. This double wall rim is made from heat-treated 6061-T6 alloy and features a width of 35mm giving you a wider spoke stance, 3 internal chambers, thicker, low profile side walls to hold up to impacts better and a welded seam to ensure it’s going to hold up to all the abuse you can throw at it. This 36-hole rim comes in black, polished, Crimson red, Perma blue, white and purple with copper splatter and purple splatter soon to be released and a weight of 17 oz. even.
The Corvus rim is available for $56.99 – $64.99 on Dan’s Comp or you can have your local shop hit up Sparky’s Distribution to get you a set ordered up today! If you’re after the purple or gold splatter, have your local shop pre-order you some through Sparky’s as well!
You can find out more about The Shadow Conspiracy and their products by visiting their website — TheShadowConspiracy.com
Just getting into BMX or you want to get your hands on a dialed complete? Take a peek at Aaron Ross’ signature EX complete bike from Sunday Bikes. This bike starts out with the frame that features a 75-degree head tube angle, 71-degree seat tube angle, 8.375″ stand over height, 11.5″ bottom bracket height, a 13.25″ chain stay length and a 20.75″ top tube. This frame has a chromoly Wave down tube, top tube, chain stays, drop outs and head tube. This bike also features a full chromoly EX fork, full chromoly Triump XL Replica bars with an 8.5″ rise, 28″ width, 12-degrees of back sweep and 1-degree of upsweep, Sunday’s Freeze 52mm top load stem, Aaron Ross grips, 175mm Sake cranks, a Sabretooth 25-tooth sprocket, Odyssey Twisted PC pedals, a PCY 410H chain, the Aaron Ross Odyssey Principal Tripod seat, 3/8″ sealed female hubs (9-tooth cassette in the rear) laced to Sunday’s Lightning rims and Current 2.25″ tires. Wrap things up with the Odyssey Springfield brake kit for some dialed braking, a weight of 26.20 lbs. and this gloss black and ocean blue splatter color with pink graphics for the color.
The Aaron Ross EX complete is available for $499.99 or Dan’s Comp or you can get your hands on one by having your local bike shop hit up Full Factory Distribution today.
You can find out more about Sunday Bikes and their products by visiting their website — SundayBikes.com
Time for a new sprocket? Looking to give the spline-drive sprockets a go? Take a peek at Profile Racing‘s Spline Drive sprocket. This sprocket is CNC machined right here in the U.S.A out of 6mm thick 7075 aluminum with a 5 spoke design with 1/8″ thick teeth that gives it a clean look and helps reduce weight. You can find a 19mm, 48-splined chromoly insert that is pressed into the sprocket that eliminates the need for a crank arm bolt. The Spline Drive sprocket is available in colors of black, blue, purple, gold, green, silver, matte black, Military green and camo wrapped, sizes of 25, 28 and 30 tooth with a weight of 2.65 oz. (25t).
The Spline Drive sprocket is available in some colors for $59.99 on Dan’s Comp, or in all available colors for $64.95 in the Profile Webstore. You can also have your local shop hit up Profile Racing directly to get you one ordered up today!
You can find out more about Profile Racing and their products by visiting their website — ProfileRacing.com
The time has come for Scott Ditchburn’s new signature Thunderbeast frame from Subrosa to be delivered! This full 4130 chromoly frame has a 75-degree head tube angle, 69-degree seat tube angle, 9″ stand over height, 11.6″ bottom bracket height and a 13.5″ – 14″ chain stay length. This frame features gussets on the top and down tubes, a heat-treated head tube and Mid bottom bracket, a double butted top tube, a double butted and ovalized down tube, an investment cast wishbone and extra thick chain stays, an investment cast seat stay bridge, 6mm thick heat-treated drop outs with plenty of hub guard clearance, removable seat stay brake mounts and an integrated seat post clamp. The Thunderbeast frame will come in top tube sizes of 20.5”, 20.75” and 21”, colors of black and concrete gray and a weight of 5.1 lbs. (21″).
The Thunderbeast will be out on March 10th! You can pre-order one for $329.99 on Dan’s Comp or have your local shop hit up Sparky’s Distribution to get you one ordered up today!
You can find out more about Subrosa and their products by visiting their website — SubrosaBrand.com
Spring is coming and your closet could use a little freshening up. The 4140 shirt from The Daily Grind is looking good and wants you to pick it up. These shirts are screen printed on black 100% cotton shirts with the Daily Grind 4140 logo and sizes of small, medium, large, XL and XXL available!
The 4140 shirt is available for $17.99 on Dan’s comp or you can have your local shop hit up The Daily Grind directly to get you one ordered up today!
You can find out more about The Daily Grind and their products by visiting their website — TheDailyGrindBMX.com
That wraps up the 97th round of Products:! Hopefully I’ll see some of you guys down in Zumbro Falls at the 2014 BV Jam today! Otherwise, I hope you can get out and ride this weekend for a little bit! Now, go check out more of our Originals or head over to the Daily Section for all the latest BMX videos, news, products and more!
Want more Products:? Check out past editions below!
This website uses cookies.