Here’s an exclusive first look at Demolition‘s brand new Marble colorway that will be hitting shops and mail-orders worldwide in March! This colorway will be available on their Brace, Stylus and Top Lodes stems, the Merrit and brand new Markit X Demolition sprocket, Rogue, Rolls, RotatoR, Bulima and Ghost Hubs, Zero rim and their Pivotal and Tripod Seat posts! If you’re feeling this, hit your local shop and tell them to get ahold of 180 Distribution as soon it drops because this stuff will go FAST.
You can find out more about Demolition Parts and their products by visiting their website — DemolitionParts.com
Specs and details on each of these products that the Marble colorway will be available on can be found after the jump!
Stems:
Brace: Aaron Smith signature stem. True top-load 6061 alloy stem with extensive internal and external machining to reduce weight. Beveled edges and top cut-out for fork top cap to be recessed. 50mm wide for extra clamping area.
Reach: 50mm & 53mm
Width: 50mm
Stack Height: 33mm
Recessed for ø32mm Bolt
Rise: 35mm (Upright)
Weight: 12.3 oz (50 mm)”
Stylus: The Kris Fox signature 6061 alloy stem with extensive internal and external machining. Beveled edges and concaved side cut-outs keeps the stem light and very clean looking. Cut-out on top of stem for fork compression bolt to be recessed.
Reach: 50mm
Stack Height:32 mm
Width: 48mm
Rise: 8.5mm (Upright) / 23.5mm (Inverted)
Recessed for ø32mm Bolt
Weight: 10.0 oz
Top Lodes: The Connor Lodes signature top-load alloy stem with extensive internal and external machining. Beveled edges, rounded back , top cut-out for fork top cap to be recessed and CNC logo also gives this stem a great aesthetic look.
Reach: 50mm
Width: 50mm
Stack Height: 32mm
Rise: 21mm (Upright)
Recessed for ø32mm Bolt
Weight: 11.1 oz.
Sprockets:
Merrit: CNC machined from 6 mm thick, 7075 aluminum with 4 sprocket bolt holes for extended life and a new tooth design to allow better chain engagement.
Also available w/ splined insert: Hardened steel insert, keyed for 19mm/ 48-splined spindles.
Available Teeth: 25t, 27t, 28t & 30t
Teeth: 1/8″
Bore: 15/16″
Adapter: 19 & 22mm included
Weight: 1.9 oz (25T)
Demolition X Markit: – To Be Announced
Hubs
Rogue: Lightweight 6061-T6 aluminum, low flange hub. 14mm, 4140 heat treated axle 1-pc. driver with 4 pawls for a loud and clenching engagement. 2 lrg. sealed bearings in hub shell. 3 bearings in driver.
Spacing: 110 mm
Rear Axle Type: 14mm
Hub Flange Diameter: 27 mm
Hub Center to Flange: 49 mm
Axle ends come with allen key insert for easy installation
Available in RHD & LHD
Available in either 9t or 10t drivers
Weight: 14.4 oz (w/ 9t CR-MO driver)
Rolls: The Rolls V2 featuring the all new Switch Drive System (SDS), which allows the 1-pc driver to flip pawls from RHD to LHD. 14mm heat-treated female/ male axle w/ allen insert for easy removal. 2 large sealed bearings (#6902) in the 6061 T6 shell. Polymer bushing sleeve in driver that protects smaller geared drivers from bearing blow-outs.
Spacing: 110 mm
Rear Axle Type: 14mm
Pitch Center Diameter (PCD): Drive side: ø51.5mm Non Drive Side: ø45
Hub Center to Flange: 27 mm
Hub Shell Bearing Type: QTY-2 #6902
Available in either 9t or 10t drivers
Sold separate: Solid 14mm axles & 7075 AL screw-on hub guard
Weight: 15.6 oz (w/ 9t CR-MO driver)
RotatoR: Ryan “Biz” Jordan’s signature freecoaster hub. 6061-T6 aluminum hub shell. 14 mm heat-treated axle w/ allen insert for easy removal. 1-pc CRMO driver and ACB bearing for side support. Includes 3 slack washers for adjustements.
Spacing: 110 mm
Rear Axle Type: 14mm
Pitch Center Diameter (PCD): Drive side: ø57.5mm Non Drive Side: ø57.5
Hub Center to Flange: 26.4 mm
Hub Shell Bearing Type: 6002 (x1) non-drive side, 7905 ACB (x1) drive side
Available in either left hand drive or right hand drive drivers
Includes 3 slack adjustment washers that adjusts freecoaster slack
Available in 9t driver only. Driver Bearings: Qty 2- 7802-14
Sold separate: Solid 14mm axles & 7075 AL screw-on hub guard
Weight: 23 oz (w/ 9t CR-MO driver)
Bulimia: Bulimia V2 comes complete with an all new body shape and anodized cones. Still one of the most copied front hubs ever, due to it’s lightweight body, smooth bearings and simplicity. 36H low flange, Al. shell with 3/8″ 4140 chromoly axle, 2 sealed bearings and alloy axle nuts.
Spacing: 100 mm
Front Axle Type: 3/8
Hub Flange Diameter: 38 mm
Hub Center to Flange: 34 mm
Hub Guard Sold Separate
Weight: 7.6 oz.
Ghost: All new Ghost hub. Clean and simple looks with the male into female axle system. 36H low flange aluminum hub shell with a 4140, 14mm heat-treated CRMO center axle, 3/8” bolts and 2 large sealed bearings that are pressed further into shell to prevent bearing blowouts and movement.
Spacing: 100 mm
Front Axle Type: 3/8 Bolt On
Hub Flange Diameter: 38 mm
Hub Center to Flange: 34 mm
7075 AL screw on hub guard sold separate
Weight: 9.6 oz.
Rim
Zero: The Zero rim has a Double-walled design with 2 vertical ribs and welded seam. Extra drilling on inner wall to reduce weight. 36H Only
Rim Depth: 12 mm
ERD: 389
Weight: 17.5 oz
Seat Posts
Pivotal: Forged aluminum with revised, slimmed down top, making it completely slammable. Compatible only with Pivotal-style seats.
Weight: 128mm=3.5 oz & 90mm=2.3 oz
Tripod: Forged 6061 aluminum with 3 mounting points. Wedge piece is included to adjust to the two seat angles that are most commonly used. Compatible only with Tripod seats only
Size: 190 mm (7.5″)
Weight: 4.5oz
This website uses cookies.
