Here’s some really rad news for you! FBM are doing a limited edition re-issue of the old Derrick Girard signature Deployer frame! The frame will stick to a similar look, but have a few modern updates.
The Deployer Re-Issue frame is made right here in the USA by FBM from full 4130 chromoly tubing with a 74.5-degree head tube angle, 71-degree seat tube angle, 9″ stand over height, 11.75″ bottom bracket height and a 13.75″ (slammed) chainstay length. You can find a FBM head tube badge on the integrated head tube, a gusset on the down tube, double butted top and down tubes, an internally butted seat tube, Mid bottom bracket, single bend chain stays and heat-treated 14mm dropouts.
Since these Deployer frames will be made on a pre-order basis, you can choose either seat or chain stay mounted brake mounts and guides, welded or removable mounts, or go completely brakeless.
The Deployer Re-Issue frame will come in flat army green with top tube lengths of 20.75″, 21″, 21.25″ and 21.50″ and a weight of 5 lbs.. The frame is available for pre-order direct from the Last Call Distribution website or by calling 607-257-3480. Get on this now since it’s only available for a short time.
If that isn’t awesome enough, for $50, you can get the frame with a Limited Edition FBM X DRG Quadsaw sprocket. These sprockets are CNC machined in Maine by Derrick Girard himself. They’re made from 7075-T6 aluminum, come in sizes of 28, 30 or 33-tooth with a 19mm or 22mm heat-treated 4140 chromoly adaptor and come in colors of anodized black or polished.
The frame and sprocket will set you back $419.99.
We want to hear from you! Let us know what you think in the comments below!
