The new 2017 Haro Bikes completes are starting to land at BMX shops and mail-orders worldwide, so we figured it would be a good time to take a closer look at Dennis Enarson‘s signature 2017 SD Complete Bike. This bike starts out with Dennis’ signature “SD V2” frame that is made from 100% chromoly tubing with a 75-degree head-tube angle, 71-degree seat tube angle, 21″ top tube length, 10″ standover height, 11.5″ bottom bracket height and a 13.75″ chainstay length. You can find an integrated head tube, gussets on the top and down tubes, butted top, down and seat tubes, an hourglass shaped Mid bottom bracket, an integrated seat post clamp, tapered seat and chain stays, and removable brake mounts on the frame. This bike comes with Dennis’ signature Rig handlebars from Demolition Parts, which are made from 13-butted, 4130 chromoly with a 9″ rise, 29″ width, 12-degrees of backsweep, 2-degrees of upsweep, a crossbar height of 6.5″ and a crossbar width of 11.28″. The fork is Dennis’ signature SD fork that is made from 100% heat-treated chromoly with a 1-piece, CNC machined steerer tube, tapered legs and investment cast dropouts.
The rest of the bike is decked out with Haro and Demolition parts…
Grips: Demolition Parts – Dennis Enarson signature grips
Stem: Haro – Lineage CNC Alloy topload stem
Headset: Integrated
Seat: Demolition X Markit BMX Tripod
Seat Post: Alloy Tripod
Cranks: 2-piece chromoly, 48 spline, 175mm
Bottom bracket: 22mm Mid sealed
Pedals: Demolition Parts – “Trooper” plastic loose ball
Sprocket: 28-tooth Alloy
Chain: KMC half link chain
Front Hub: 36-hole alloy shell with sealed bearings and a female axle.
Rear Hub: 36-hole alloy shell free-coaster with a male axle and a 9-tooth driver.
Rims: Haro – Sata 36-hole Alloy double wall
Tires: Demolition Parts – Rig tires – 2.25″ front and rear
Brakes: Haro 1978 alloy brakes
The 2017 Dennis Enarson signature SD complete from Haro is available in Olive Green with a 21″ top tube length only and comes with a price tag of $979.99 through BMX shops and mail-orders that carry Haro Bikes worldwide now.
You can find Dennis’ signature grips from Demolition Parts on this bike.
Haro Lineage topload stem.
Dennis Enarson signature Rig tire from Demolition Parts in 2.25″ front and rear.
Alloy front hub with sealed bearings and a female axle.
This website uses cookies.