Saturday is here again! That means it’s time to take a closer look at some fresh products for you to deck your bike out with. This week we take a closer look at And Forks 23 fork, The Shadow Conspiracy‘s Sano brakes, Fit‘s Mac bars, Tree Bicycle Co.‘s Collet stem and Subrosa‘s Bitchin’ cranks. So let’s get rolling with the 5th edition! Check it!
After a little bit of a delay, the first shipment of 23 And Forks are getting close to finally becoming available. These fully post-weld heat-treated 4130 seamless Japanese chromoly forks feature legs that taper from 32mm to 25mm diameter, internal butting on the legs, a 165MM butted CNC machined one-piece steerer tube, 5mm thick laser cut drop outs, built in machined headset race, with a CNC machined recessed And Forks logo, a 20G CNC machined 6061-T6 aluminum plug pressed into the steerer tube for extra strength and finally a CNC machined 6061-T6 aircraft grade aluminum headset cap with a CNC machined logo.
This is the 23mm version which features the steeper rake and the unique dropouts to fit your pegs. This version of the fork will be available in clear coat raw, black and chrome.
And Forks will also have their similar 33mm offset version available as well.
These will be landing worldwide soon. You can find out more about And Forks by visiting their website at AndForks.com.
Looking for a new stem that is a little different than what all your friends are running? Here’s a look at the Collet topload stem from Tree Bicycle Co.. This stem is made from 7075-T6 aluminum and features the collet head tube clamp system which is a compression based system that is unlike other stems on the market. This design allows four bolts, two to hold the compression of the stem on the head tube and two to hold the bars in place. Tree have also CNC machined the Collet stem for a smooth and knee friendly design. The stem features a length of 53mm and a rise of 8.4mm with a 30mm stack height (drop load) or a rise of 25mm with a 30mm stack height (top load and weigh in at 8 oz.. Both versions of the Collet stem are available in black, blue, red, raw and gold.
Curious how the stem works? Check out this video showing how to install the stem properly.
You can pick the Collet stem up on Dan’s Comp for $74.99. You can also have your local shop hit up QBP here in the U.S to get yourself one ordered up!
To find out more information about Tree Bicycle Co., check out their website at TreeBicycleCo.com.
Looking to stop a little faster and stop burning through your shoes? Check out Drew Bezanson’s new signature Sano brakes from Shadow Conspiracy. The arms are CNC machined from 6061 aluminum for a stiff feel and feature a low profile design that gives you more chain and tire clearance. The Sano brakes come with a Shadow machined cable hanger and those super soft clear brake pads that work real good. The brakes weigh in at 6.2 oz. with black, white, Crimson red, purple matte Highlighter blue and raw polish for color options.
The brakes are available now. You can pick them up from Dan’s Comp for $62.99 or you can have your local shop hit up Sparky’s Distribution or QBP here in the U.S.
You can find out more about Shadow Conspiracy by visiting their website at TheShadowConspiracy.com.
There’s no doubt that Shawn McIntosh has been on fire lately. Here’s a look at his signature Mac bars from FIT. These bars are made from 100% 4Q baked heat-treated straight gauge .065″ thick 4130 chromoly with a rise of 8.75″, 28.5″ width, 11-degrees of backsweep 4-degrees of upsweep and feature a “big box” design which means there’s a larger center area with a 11″ crossbar width, dual radius bends with a larger top bend to increase the strength of the bars by cutting back on the stress. These Mac bars are made here in America and come in matte black and chrome with a weight of 31.9 oz.
You can pick these bars up on Dan’s Comp for $59.99 (black) – $69.99 (chrome) or have your local shop hit up The Building Distribution here in the U.S.
For more about Fit, hit their website at FitBikeCo.com.
Need a fresh pair of cranks? Take a peek at Subrosa‘s Bitchin’ cranks. These post-weld T5 Deathproof heat-treated seamless 4130 chromoly cranks feature a low profile and lightweight 2.5 piece design and a heat-treated 19mm 48-spline spindle. The cranks are available in 165mm and 175mm lengths, weigh in at 30.6 oz. (175mm) with matte black, matte white, matte red, matte blue, matte army green, chrome, gun metal gray and trans orange for colors. The Bitchin cranks come with a limited lifetime warranty and the tool to install and remove the arms.
You can pick the cranks up on Dan’s Comp for $159.99 – $169.99 or you can have your local shop hit up Sparky’s Distribution here in the U.S to order a set.
Check out more about Subrosa on their website, SubrosaBrand.com.
Well, that wraps up the 5th edition of Products:! Shout out to all the brands that Support The Union.
Products: Vol. I
Products: Vol II
Products: Vol III
Products: Vol IV
Check back next Saturday for the sixth edition! Until then, check out the Daily Section for all the latest videos and products from all the brands in BMX.
This website uses cookies.