BMX frame Archives – Page 86 of 93

Sneak Peek: Terrible One – SFA 2012 Frame

June 14, 2012

Here’s a look at the updated Garrett Byrnes signature SFA frame from Terrible One for 2012 that is made right here in the U.S.A by S&M. The frame features a 74.5-degree head tube angle, 71-degree seat tube angle, 8.375″ stand over height, 11.75″ bottom bracket height and a 13.75″ – 14.125″ chain stay length. The SFA frame features gussets on the top and down tubes, tapered seat and chain stays, heat-treated drop outs, removeable brake mounts and an integrated seat post clamp. The frame will be available in 20.75″, 21″ and 21.25″ top tube lengths and come in colors of gloss black, clear gloss raw, Frans tan and translucent orange.

Expect this frame to be out in 5 to 6 weeks! (Towards the end of July).

Just for the hell of it…

BSD – Antony Lille and the Too Loose Frame

June 11, 2012

Antony Lille’s signature “Too Loose” frame from BSD is finally out now. Here’s a fresh promo edit that’s damn good and definitely something you want to check out.

“ Antony Lille has been putting away clips for this new Too Loose frame edit for a short while now and as always delivers a dose of fast paced and creative street riding with his own unique style. A lot of the edit below was filmed during the photo shoots for Anto’s interview in the first issue of Figuré BMX magazine which you should try and get a hold of if you havn’t yet had the chance to see it. Our thanks go out to John Garcia for filming with Anto. Enjoy…

Anto’s signature Too Loose frame features a super short 13.25″ rear end, a steep 75° head angle and slightly beefier tubing so that it holds up to his go big and fast approach to riding. Check out the frame photos below as well as Anto’s newest print advert as seen in Soul BMX Magazine issue 74 and for the full spec head over to the Tooloose frame product page”

Filmed by John Garcia. Additional filming and editing by Dave Sowerby.

Sneak Peek: United – Christian Rigal Frame

June 7, 2012

Here’s a sneak peek that Christian Rigal posted up of his setup which features a signature frame from United. No info has been released yet, but I’d imagine we will be hearing more soon.

Product: The Make – Hair of the Dog Frame

May 28, 2012

A few months back, The Make hinted at a new frame they were working on with The Count. Today, they dropped some sneak peek photos and specs of the final Hair of the Dog frame that will be available in August. This 4130 Sanko chromoly frame has a 75-degree head tube angle, 71-degree seat tube angle, 11.5″ bottom bracket height, 8.5″ seat tube height and a 13.25″ (slammed) chainstay length. The frame features a double butted top tube, downtube and seat stays, a CNC machined and heat-treated head tube, heat-treated and externally and internally machined mid bottom bracket, an integrated seat post clamp, removable brake mounts, an internally and externally butted seat tube, an extra wide rear triangle for big tires and 5mm thick heat-treated drop outs. The Hair of the Dog frame weighs in a 4.5 lbs. and will be available in gloss black and Midnight blue with a 20.625″ top tube length.

You can check out more photos of the frame here.

Sneak Peek: Fiend – Embryo Frame

May 23, 2012

Here’s a look at Fiend‘s new Embryo frame that will be out early July. They haven’t released any specific specs or information on the frame yet, but it looks like it has a gusset on the down tube, integrated seat post clamp, removable mounts and an extra wide chain stay for some big tires. Expect more info soon!

Product: Fit – Trans Teal Mac Frame

May 18, 2012

FIT have added a new trans teal colorway to the Shawn McIntosh “Mac” frame. I don’t know about you, but that looks real good to me! More info on the frame can be found here.

Sneak Peek: Mutiny – Updated Lucky Strike

May 15, 2012

Here’s a sneak peek look at Mutiny‘s updated Lucky Strike frame. This version features S-Bend chainstays and the new Azure Blue colorway. Looks real good. This should be out soon along with a bunch of other new Mutiny products.

Sneak Peek: Subrosa – Simone Barraco “Noster” Frame

May 3, 2012

Subrosa dropped this sneak peek of Simone Barraco’s signature “Noster” frame that is in the works. It’s only in prototype stages at the moment, so details won’t be available for quite a while. I’m sure this will be one of their Interbike premiers this year. Here’s a few words from Subrosa…

“Simone is in the office today hangin out, and working up some ideas for the graphics on his pro model Subrosa frame! Yes, we are currently working on a frame for Simone and he is testing out a sample frame now. We can’t realease any details on the bike now other than that it will be called the “Noster” and it means “our”. Simone wants to do a frame for eveyone, so that’s the direction we’re going with it. Look for more details soon, and if you happen to run into Simone on during his travels you can get a sneak peek at the prototype!”