Fit Bike Co. Archives – Page 51 of 134

Ender Ender – Dan Conway “Holy Fit”

April 5, 2016

There’s not a whole lot of riders out there that would go for a clip when literally everything was stacked against them. When it came time for Dan Conway to get a clip that ultimately became his ender for his section, there wasn’t much that could stop him. Despite rain, two flat tires, multiple crashes and security hovering, he still managed to get it done. Check out this behind the scenes look, along with the story from Dan in this new Ender Ender courtesy of DIG

Want to see Dan’s actual “Holy Fit” section? Watch it here: Fit Bike Co. – Dan Conway “Holy Fit”

“The DIG Ender Ender series continues! Sometimes it’s impossible to leave a trip without trying something that’s been on your mind. That’s exactly what Dan Conway encountered when he was on a Holy FIT filming trip in Phoenix, AZ. Despite pretty much every factor pretty much fighting against Dan he got it done somehow, with some hilarious results in the process! Let the man himself explain more…

Filmed and edited by Stew Johnson”

[Read more…]

Fit Bike Co. – Brandon Begin Signature Line Promo

April 2, 2016

Fit Bike Co. have released this new Brandon Begin video promoting his SIGNATURE FRAME and four-piece bars. Hit play to check out some dialed riding, along with a look at both items that are out now!

“Here’s a little somethin’ somethin’ from your favorite El Toro-trippin, peg slippin, long hair don’t care boyeee Brandon Begin. His signature BEGIN FRAME and BEGIN 4PC BAR have been out for a minute, but he and Charlie Crumlish captured the magic in recent months, and now you get to see ’em in action!

Filmed/Edited: Charlie Crumlish with VHS help from Blake Myers.
Music: https://soundcloud.com/fumanbeatz/brandy-beegus-frome-pramo-feat-camron-lmao”

[Read more…]

Ben Lewis Video Bike Check

March 8, 2016

DIG caught up with Ben Lewis to take a closer look at his signature Benny L setup decked out with Fit Bike Co. and Animal Bikes parts from top to bottom! Plus, there are a few riding clips mixed in for good measure. Hit play and enjoy!

Filmed and edited by Matty Lambert
[Read more…]

The Art of the BMX Sprocket

March 4, 2016

It’s been a while since we’ve done one of these “The Art Of” pieces, so we figured it would be a good time to take a closer look at one part in particular that we’ve been thinking about lately, the BMX Sprocket. The other day we were bouncing around to a few different brands websites to see if there were any new products or anything else new to see, and we ended up staring at the sprockets. When you think about it, the sprocket is one of those things that can really be altered the most as far as aesthetics go. We’ve seen A LOT of sprockets in BMX’s history, so we decided to stick to sprockets that are currently available. Even with cutting it back to that, there’s still a ton of options available. Add in the different combos between the standard bolt drive, Spline drive, and socket drive, colors, versions with guards, etc. There’s a lot to take in. We bounced around and picked out some of our favorites from a number of brands, which you can check out below with a few words about each! Ready?

[Read more…]

Fit Bike Co. in Arizona: The Outta Hand Trip

March 1, 2016

Here’s one from a trip to Arizona some of the Fit Bike Co. team took to Arizona a little while back! This starts out with a wild ledge ride and doesn’t slow down until the end! Amazing riding and spots in this. Get on it!

“Brandon Begin, Morgan Long, & Austin Aughinbaugh trip over to Arizona and meet up with fellow Fit shredder / Phoenix resident Troy Blair. Such a rad and diverse crew of riders putting their mark on the many amazing spots that AZ has to offer. From technical to unorthodox to pegless and straight up gnarly, these dudes have you covered.

“The trip was outta hand from the beginning with minimal planning and last minute changes. Begin, Austin Aughinbaugh, and myself were the only riders able to make it and Chris Mortenson jumped in last minute to shoot photos. We headed to Vegas and picked up Troy Blair from a realities house on the way. Malouf was the man behind the camera and giving us a place to stay and he made sure that good times were had from Vegas to AZ on and off the bikes. Tony and The gully factory house and affiliate Reed Stark had the Fit crew in the best of vibes and led to never ending jokes. From the partying to the jokes to the riding everything got outta hand and as I write this we are all in a group message trying to plan another trip out to AZ.” – Morgan Long

Filmed and Edited by Tony Malouf
Cover photo by Chris Mortenson

Music: Bones – “HDMI”” – Ride BMX

[Read more…]

Ender Ender – Van Homan “Holy Fit”

February 26, 2016

If you have seen Van Homan‘s section in the Fit Bike Co. “Holy Fit” DVD, you undoubtably have seen the insane grind gap over grind that he did to wrap things up. What you probably didn’t know is that clip was years in the making. Get a little insight from Van on just how long it took and what motivated him to get it done first try when he got the chance!

Want to watch Van’s “Holy Fit” section? Watch it here: Fit Bike Co. – Van Homan “Holy Fit”

“Van Homan has done it all and since the early days of Seek and Destroy and Anthem he’s been a figure head behind sending it in the streets. How many other people have been putting out consistently crazy video parts for almost twenty years?! It’s no surprise then that we have a second Ender Ender feature with Van, this time from last year’s Holy FIT DVD and that bonkers up rail to gap over pegs into the bank. No one does it like Van…” – DIG

[Read more…]

How BMX Frame Stays Are Bent

February 17, 2016

A video posted by Chris Moeller (@moeller_chris) on Feb 16, 2016 at 1:53pm PST

Two in a row from Chris Moeller this morning! Here we have a look at the seat stay tubing being bent for the Brian Foster frame from Fit Bike Co. at the S&M Bikes warehouse out in California. Another one of those not so crazy videos, but still interesting to see. You would think it would be a fancier machine, but it looks to be pretty much man power, a little machine power and leverage to make it happen. It’s also interesting since this is just one small part of the frame building process. We’re loving these behind the scenes production clips!

View: How BMX Handlebar Tubing Is Cut

[Read more…]

Fit Bike Co. – Jordan Hango 2016 Video

February 16, 2016

It’s always a good day when some fresh Jordan Hango footage surfaces online. The crew over at Fit Bike Co. just dropped three minutes of rail destruction, wall rides, gaps and drops for your viewing pleasure from the Canadian! Hit play and enjoy!

“Some dudes just bring the beast. Jordan Hango is one of ’em.

Filmed/Edited by: Andrew Schubert

SUPER 8 Filming by: Brad Hill

Additional Filming: Luke Santucci, Brad Hill, Matt Desson, Wink Grant, Taylor Elvy

Music: “122 Hours of Fear,” by The Screamers”

[Read more…]