Profile Racing Archives – Page 24 of 92

Profile Racing – 58 Seconds: Dillon Leeper

December 14, 2017

Profile Racing coming through with 58 seconds of goodness from Dillon Leeper!

The crew over at Profile Racing have released their latest 58 seconds video featuring Dillon Leeper. This time around it looks like Dillon has thrown the brakes back on and fully embracing the trick possibilities thanks to those brakes. Hit play and enjoy! We would love to see more of this!

“The 9th in a short series of Profile re-cap edits titled “58 seconds.”
This time around, it’s Dillon Leeper.
Brakes back on, making due in the brick temps of RVA.
Thanks for the support, Dillon.
Enjoy!” – Profile Racing

Profile Racing – Mike Saavedra Bike Check

December 11, 2017

Get a look at Mike Saavedra’s brand new S&M setup in this bike check from Profile Racing!

After Mike Saavedra‘s eventful trip to Barcelona that lead to his bike being stolen, followed by a mission that lead to him getting the bike back, he decided to part the bike out to some of his friends over there. When he got back to California he dialed in a brand new S&M Bikes / Credence MOD setup decked out with parts from Profile Racing and more. There’s a brand new Bike Check over on the Profile Racing website giving you a closer look at the bike, along with a full parts list. You can check out this dialed unit RIGHT HERE!

What do you think of Mike’s new bike? Are you digging it? Let us know in the comments below!

Kostya Chernov Flatland Video

November 16, 2017

Check out a little Flatland action from Haro and Profile Racing’s connect in Russia, Kostya Chernov!

Here’s a little flatland to start your day off right with. Haro Bikes and Profile Racing‘s connect in Russia, Kostya Chernov, coming through with a dialed new video giving us a look at some of the clips he had been filming over the course of 2016 and part of 2017 before a knee injury took him
out. Fortunately he had a ton of great clips stacked up and was able to put together this video for your viewing pleasure. Take a peek!

“BMX is not just a bike. It changed my life to the better way!
THANK YOU BMX!
I had video taken in 2016, I wanted to add a new footage this season, but 2017 season I missed because of a knee injury. Can’t wait to ride again!
Thanks for the support to everyone, especially Profile Racing, Haro Bikes Russia and Truespin!
CameraMan: Alexander Arustamov
Music: Kareful – See Through Her”

Profile Racing – 58 Seconds: Jared Eberwein

November 9, 2017

58 seconds of trails and skatepark goodness from Jared Eberwein…

You can always count on Jared Eberwein to come through with the goods. Here’s a fresh 58 Seconds from Profile Racing featuring Jared throwing down on trails and a couple different skateparks out in California. This raw cut is loaded up with plenty of dialed riding that is worth a look. Hit play and enjoy!

“The 7th in a short series of Profile re-cap edits titled “58 seconds.”
This time around, it’s Jared Eberwein.” – Profile Racing

How To Rebuild Profile Racing & Madera Rear Hubs

October 31, 2017

Do you run Profile Racing or Madera cassette hubs? If you run them long enough, there’s a chance you might need to replace the axle, bearings or driver to get it running like new…

Is it time for you to replace the bearings, axle or driver in your Profile Racing or Madera cassette hub? If you haven’t done it before, it can be a little tricky and it can be eay to screw things up. Brant Moore had to replace his bearings, so he decided to put together this video showing you how to properly replace the bearings. Since the internals on Profile Racing and Madera hubs are identical, this works or both brands. Take a peek!

“In this video I cover how to completely rebuild your rear Profile or Madera hubs!

Replacing your bearings or any other component of a rear hub can be an intimidating task, but with a little pre thought and knowledge the process can be made very simple.” – Brant Moore

FBM X Profile Racing Maiden America Tour 2017 – Raw

October 27, 2017

Check out more from this years Maiden America Tour!

This past summer the FBM and Profile Racing teams loaded up for their annual Maiden America Road Trip that took them to street spots, skateparks, pump tracks, bike shops and more all along the East Coast! Here’s a raw cut DIG put together giving you a look at what went down.

“From Upstate NY, to the big cities (NYC/Philly), down to Richmond, Profile and FBM embark on Maiden America Tour IV, featuring clips (in order) of Cody Digs, Vic Bettencourt, Dillon Leeper, Dre Tylee, Shane Leeper, Dave Zovko, Eric Holladay, Declan Murray, Neil Hise, Steve Crandall, Joe Embry, Jay Schlie, Matt Coplon, and Kaleb Bolton.

“Thanks to Mike Erb, John Lee, Marc Meeuwissen (and his family), The Whole Mullaly Crew, Andrew York and Meseroll Bike Shop, and the Brooklyn Pump Track for their hospitality. A huge thanks to Jay Schlie and QBMX for all they do for bmx. We hope to see you on the road in the summer of 2018.” – MIA

Filmed by Matt Coplon, Dave Zovko, and Dillon Leeper.
Edited by Matt Coplon.” – DIG

Madera Memo – Unboxing the Madera and Profile Racing Hub Guards

October 25, 2017

Due for some new hub guards? This weeks Madera Memo takes a look at the different Madera and Profile Racing hub guards that they have available, and how to install them! Check out the video featuring Mike Hinkens below…

https://www.youtube.com/watch?v=-zGxpt-AE0Y

“Madera and Profile come from the same factory and share some of the same components. Both companies’ hubs should be used with and have special hub guards available. These guards are specifically designed for our hubs and do a great job of protecting your investment as well as making riding easier. Click play to learn all about our guards and then go check out the hubs they fit on!

More info and links for purchase below.

Edit: Mike Hinkens
Music: Intro/Outro: Drumlins” – Madera

Profile Racing – Mark Mulville Bike Check

October 25, 2017

Take a look at Mark Mulville’s new Standard Trail Boss setup!

The crew over at Profile Racing caught up with Mark Mulville to take a closer look at his brand new Standard Traill Boss setup that he’s rolling around on, decked out top to bottom in parts from Profile Racing and Deco. You can check out a bunch of photos and a full parts list right here — Dialing It In With Mark Mulville!

What do you think of Mark’s bike? Let us know what you’re thinking in the comments below!