Eclat - Seeker Pedal

Is it time for a new set of BMX Pedals? The crew over at Eclat have released their new Seeker Pedals for those of you who prefer a plastic pedal. These pedals start out with an injection molded nylon and fiberglass body with a wider body than most other pedals that is also thinner than the average pedal. You can find 14 molded pins and knurling on both sides of the pedal, along with a few Eclat logos for good measure. One thing you might also notice is the pedal is flat from side to side with a small concave, where most pedals feature a bulkier center to accommodate for the axle and bearings.

Inside you can find a chromoly axle and a dual bearing and bushing combination that allows the pedal to maintain strength without having too much bulk.

The Seeker pedal comes in colors of black and Army green with a weight of 15.97 oz. Available through BMX shops and mail-orders that carry Eclat worldwide now.

Knurling + 14 molded pins = plenty of traction.

These pedals feature a slimmer profile than most plastic pedals on the market. You can also see how the pedal is flat from end to end with a slight concave to give a little more grab on the pedal.