BMX bars Archives – Page 3 of 31

Subrosa – Simo Bars and Fork

April 10, 2019

Is it time for a new set of bars or fork? Subrosa have released the new Simone Barraco signature Simo Bars and Simo Fork to go with the new Simo Frame that we took a look at about a week back.

The Simo Bars are made from 100% post-weld Deathproof heat-treated, 13-butted 4130 chromoly tubing with a 28″ width, 10-degrees of backsweep and 3-degrees of upsweep. The Simo Bars come in 8.8″ and 9.3″ rise options with Black, Chrome and Sage Green colors and a weight of 28.7 oz. (8.8″) for $72.99 – $82.99 depending on color. You can pick the Simo Bars up through BMX shops and mail-orders that carry Subrosa worlwide now, or in the Subrosa Webstore!

The Simone Barraco signature Simo Fork is made from 100% post-weld Deathproof heat-treated chromoly tubing with a 1-piece CNC machined steerer tube, tapered legs with an increased inner fork leg radius to fit 2.40″ tires with plenty of room to spare and 27mm offset dropouts with clearance for pegs and hub guards. The Simo fork is available in Black, Chrome and Sage Green colors, weighs in at 32.1 oz. for $141.00 – $156.00 depending on color. You can pick this fork up through BMX shops and mail-orders that carry Subrosa worldwide now or through the Subrosa webstore now!

What do you think of the new Simone Barraco signature Simo Bars and Fork? Do you have any questions? Let us know in the comments below! Make sure you check out the Simo Frame while you’re at it!

Note: This post contains affiliate links and we could receive a small commission if you were to purchase these bars or fork from the Subrosa webstore. We would never share a product we didn’t think was quality.

Kink BMX – Nathan Williams Signature Frame And Bars

March 20, 2019

Here’s something we’re sure a bunch of you will be stoked on. The Nathan Williams signature line from Kink has arrived. Here’s a look at The Williams frame and bars that are landing at BMX shops and mail-orders worldwide now!

The Williams Frame

The Nathan Williams signature frame is made from 100% seamless 4130 Sanko chromoly tubing with a 75.5-degree head tube angle, 71-degree seat tube angle, 11.7″ bottom bracket height, 9″ standover height and a 12.75″ (slammed) chainstay length. The frame features an integrated head tube, gussets on the top and down tubes, double butted top and down tubes, an Integrated seat post clamp, a Mid bottom bracket that has been internally and externally machined, a CNC machined seat stay bridge with a Kink badge inlay, oval chainstays with plenty of clearance for huge 2.50″ tires, Anti-Slip dropout knurling, integrated chain tensioners and removable brake mounts!

The Williams frame is available in ED Black, Colorado Yellow and Translucent Blue with a weight of 4 lbs. 15 oz. (20.75″) and can be yours for $329.99!

ED Black The Williams Frame

Colorado Yellow The Williams Frame

Translucent Blue The Williams Frame

Integrated head tube with the gussets and double butted top and down tubes for a strong front end!

How good does that CNC machined seat stay bridge look with the inlay Kink badge?

Knurling on the inside of the dropouts to help keep your wheel from moving.

That’s a look at the The Williams frame! You can pick this frame up for $329.99 through BMX shops and mail-orders that carry Kink worldwide now. You can also find it in the Kink webstore!

The Williams Bars

If you’re going to pick up The Williams frame, you might as well get the bars, too! The Williams bars are made from 13-butted, TruTherm Post-Weld Heat-Treated 4130 chromoly with a 9.25″ rise, 29″ width, 11-degrees of backsweep and 1.5-degrees of upsweep. You can pick these bars up in Black, Chrome and Gold with a weight of 27.8 oz. for $64.99 – $74.99 depending on color!

The Williams Bars are available through BMX shops and mail-orders that carry Kink worldwide now. You can also find them in the Kink webstore as well!

So that’s a look at the new Nathan Williams signature The Williams frame and bars from Kink! What do you think? Do you have any questions? Let us know what you’re thinking in the comments below!

You can learn more about Kink and check out their full range of products on KinkBMX.com now!

Cult – Dakota Roche 1″ OD Bar & Stem

February 11, 2019

It looks like your options for the larger 1″ oversized bars and stems have grown. Wethepeople and BSD have offered the size for about two years now, but it really hasn’t caught on too much. It looks like Cult have decided to give it a shot and have released their new Dakota Roche signature 1″OD Dak Bars and Dak Stem for you to check out. Above is a short promo filled with some heavy clips from Dak you won’t want to miss and below is specs and details on both items. Just remember, if you decide to make the switch to the 1″ OD size, you’ll need BOTH bars and a stem!

First off, let’s explain the size… The traditional BMX bars and stem size works well, but with the way BMX riders have progressed and been sending it on bigger and gnarlier setups (IE: Dak’s video above), the larger diameter gives you increased strength and more stem grab to prevent breaking and resist slipping. This is definitely ideal for the crazier riders out there that have had issues with breaking bars.

DAKOTA ROCHE SIGNATURE DAK 1″ OD STEM

The Dakota Roche signature DAK 1″ OD stem is made from CNC machined 6061 aluminum with a 51mm reach and 32mm rise. The stem has the larger 1″ diameter for clamping with beveled edges, a rounded back, solid chromoly bolts and a recessed top for a flush fork cap. The body of the stem also has an engraved Dak logo. Available in Black only for $64.99 through Cult dealers worldwide and online.

DAKOTA ROCHE SIGNATURE DAK 1″ OD BARS

The Dakota Roche signature Dak bars in the 1″ OD size are made from 100% heat-treated and butted chromoly tubing with a 28″ width, 11-degrees of backsweep and 2-degrees of upswpeep. The bars feature that larger 1″ diameter tubing where the stem clamps, then tapers down to the standard size so they will feel like traditional bars. There’s cult lines on the ends to help trim the bars down if you need to as well.

The Dak 1″ OD bars come in Black and Chrome color with 8.85″ and 9.5″ rise options for $64.99 through BMX shops and mail-orders that carry Cult worldwide.

Reminder: You need BOTH a 1″ OD stem and 1″ OD bars. You can’t take your existing bars or stem and match them with the larger size, unless you already have a WTP or BSD stem or bars with that same size.

Wethepeople BMX – Dan Kruk Stallis Bars Promo

May 18, 2018

Dan Kruk puts his signature Stallis Bars from Wethepeople to work…

The crew at Wethepeople coming in hot with a banger of a promo video featuring Dan Kruk putting his signature Stallis Bars to good use out in the streets. Dan tends to ride his bars a little Chicago, which pushes a lot of peoples buttons, but when you ride as good as Dan does (the video is more than enough proof) you can do whatever the hell you want. Check out the video, then learn more about the bars below!

“Dan Kruk has a progressive handle bar angle and some next-level progressive moves to go along with it. If you have ever seen Dan ride you know he needs bars that will hold up to what he can throw at them when he working on his next NBD. His signature “Stallis” bar is strong enough for Dan which means it will be more than strong enough for you. These are made to Dan’s exact specifications so he can take them out of the box and ride them with no modifications so you know they are the right size for throwing the bars. Luckily the angle you choose to run them is up to you.

Filmed and Edited by: Grant Castelluzzo” – Ride BMX

The Stallis bars are available in the traditional 22.2mm clamping area as well as the OS 25.4mm for extra strength.
Material: full liquid post heat-treated 4130 “M2“ crmo
Tubing: 7/8” multiple butted
Rise: 9.25″
Width: 28.5″
Backsweep: 11 degrees
Upsweep: 2.666 degrees
Special Features: dual radius bends for extra strength
Colors: Gloss ED black
Weight: 809g (28.53oz : 1.78lbs)

BSD – 4-Piece Grime Bars

May 1, 2018

Take a closer look at the new Denim Cox signature Grime 4-piece Bars…

The crew over at BSD have been working with Denim Cox on his first set of signature bars. The Grime Bars are a 4-piece handlebar made from fully heat-treated, multi-butted 4130 chromoly tubing with a 9″ or 9.5″ rise, 29″ width, 11-degrees of backsweep, 2-degrees of upsweep and a weight of 1.8 lbs. The Grime bars are also available in the regular 7/8″ clamping size, or the Oversized 1″ clamping size (25.4mm) if you are running the bigger style stem. The Grime bars are available in Black and Stainless and can be picked up through BMX shops and mail-orders that carry BSD worldwide now for $69.99 – $79.99.

Available in 9″ or 9.5″ rise, 7/8″ or 1″ clamping size in Black and Stainless colors. 8 different combinations.

Grimey…

That’s a look at the new Denim Cox signature Grime 4-piece bars. What do you think? Do you have any questions? Let us know what is on your mind in the comments below!

Kink BMX – Eagle 4-Piece Bars

March 16, 2018

Kink have released their new Eagle 4-piece bars…

Is it time or a new set of Bars? Thinking about picking up a 4-piece bars? Here’s a look at the new Eagle 4-piece bars that Kink just released. These bars are made from straight gauge 4130 chromoly with a TruTherm post-weld heat-treatment, 9″ and 9.5″ rise options, a 29.5″ width, 12-degrees of backsweep and 1-degree of upsweep. The Eagle Bars weigh in at 37.7 oz. (9″) / 38.5oz. (9.5″), come in colors of ED Black and Chrome with a a price tag of $69.99 – $79.99 through BMX shops and mail-orders that carry Kink worldwide, and the Kink Webstore, now!

What do you think of the Eagle Bars? Do you have any questions? Let us know what you’re thinking in the comments below!

– Rise: 9″ or 9.5″
– Width: 29.5″
– Backsweep: 12°
– Upsweep: 1°
– Straight Gauge 4130 Chromoly Steel
– TruTherm Post Weld Heat Treated
– Weight: 37.7oz(9″) / 38.5oz (9.5″)

Snakebite – 4-Piece Meth Bars

February 7, 2018

Snakebite have released the latest version of their 4-piece Meth Bars…

A post shared by Snakebite BMX (@snakebitebmx) on Feb 6, 2018 at 12:57pm PST

We didn’t know it, but Snakebite have had their own 4-piece bars for a while now. In fact, they just released the 3rd version of their 4-piece Meth Bars. These 4-piece BMX bars are made right here in the U.S.A from full 4130 chromoly tubing with an 8.9″ or 9.2″ rise, 29″ width, 1-degree of upsweep and 12-degrees of backsweep. They’re based off the old Forklifter and Bully bars, but with modernized geometry. The bars are available in Black and Chrome color options with a price tag of $74.99 (black) or $84.99 (Chrome) and can only be found at Goods BMX!

Mutiny Bikes – Villij Bars

January 29, 2018

Get a look at the Tom “Robbo” Robinson signature Villij Bars from Mutiny Bikes!

Are you due for a new set of BMX bars? Here’s a look at the new Tom “Robbo” Robinson signature Villij Bars from Mutiny Bikes that are landing at BMX shops and mail-orders worldwide now. These bars are made from 100% heat-treated butted 4130 chromoly tubing with an 8.7″ rise, 30″ width, 12-degrees of backsweep, 1-degree of upsweep and a weight of 28 oz. The bars are available in Black only and will cost you $65.00.

As we mentioned above, the Tom “Robbo” Robinson signature Villij bars from Mutiny Bikes are available through BMX shops and mail-orders that carry Mutiny worldwide now! Not quite what you are looking for? Check out more BMX bars here.