BMX hubs Archives – Page 6 of 29

Madera – Dan Kruk Welcome To Pro Party Paint Teaser

September 6, 2016

Earlier today we spotted that Dan Kruk had been given the bump up to the Madera Pro team, and with that news came his new signature Party Paint Colorway hubs and stem! Above is a quick promo for the hubs that we have a feeling might be a teaser for his official welcome to the Pro team video as well. Either way, check out a few rad clips along with a look at the new colorway. You can take a closer look at the colorway here as well — Dan Kruk signature Party Paint Colorway from Madera.

We want to hear from you! Let us know what you think in the comments below!

VISIT: FRONT PAGE // DAILY SECTION // BMX COLOR APP // BMX VIDEOS // RANDOM // BMX Games

Madera – Dan Kruk Signature Party Paint Colorway

September 6, 2016

It looks like Dan Kruk has been given a very well deserved bump up to the Madera Pro team. To celebrate, Dan has received his very own signature “Party” colorway which is a splatter of colors on Madera’s hubs, sprockets and Mast stem! Check out the goods above, along with more info below! These are available NOW and in limited supply, so act fast!

“In celebration of Dan Kruk’s bump to Madera’s Pro Team we are releasing his signature ”Party Paint” color way. We started with a limited run, so order them while you can! To start, we have:
–Madera V2 rear hubs in RHD and LHD
–Madera Pilot front hubs
–Madera Mast stems in 48, 51, and 54mm
–Madera Signet full guard sprocket.
Join the party and hit up your local shop, favorite mail-order, or online store!”

We want to hear from you! Let us know what you think in the comments below!

VISIT: FRONT PAGE // DAILY SECTION // BMX COLOR APP // BMX VIDEOS // RANDOM // BMX Games

Profile Racing – Liam Eltham Signature Paisley Colorway

July 28, 2016

It looks like Profile Racing will be releasing a new limited edition colorway on August 1st! This time around Liam Eltham has received his own signature colorway, which he decided to go with the Paisley color that we’ve seen pop up in the past on different products. Based off the photos, it looks like the color will be available on Profile’s Mini and Elite hubs, along with their Push topload stem! These will be going fast, so make sure you hit up your local shop and tell them to get your pre-order in now!

[Read more…]

Profile Racing – How To Maintain the Z-Coaster

July 20, 2016

By now we’re all pretty familiar with Profile Racing‘s take on the freecoaster, the Z-Coaster Hub. What you might not be familiar with is just how to maintain this hub to keep it rolling. Ironically, Profile’s best recommendation for maintenance is to not take it apart unless there is some form of malfunction inside. So, if for some reason you have a malfunction inside and need to take it apart, they have a step by step guide on just how to do it and it appears to be quite easy, actually. You can learn all about how to properly maintain the Z-Coaster hub here — Z-Coaster Faqs and Tech Tips
[Read more…]

Colony BMX – How To Replace a Freecoaster Driver

July 16, 2016

Do you have a freecoaster? More specifically, a Colony freecoaster? Above is a video Colony released giving you the step by step instructions on how to remove and replace the driver on their hub. This is a pretty easy, straight forward process, but it’s good to see and know how it’s done properly. After you watch this, make sure you check out the video on How To Adjust Freecoaster Slack, which is a little more complicated but just as important when it comes to maintenance.
[Read more…]

Merritt BMX – Final Drive Freecoaster Maintenance Video

June 24, 2016

Did you pick up the Merritt Final Drive Freecoaster hub or are considering picking one up? Here’s a detailed video giving you a first person look at just how to take the hub apart properly and how to put it back together. Freecoasters can be a little tricky, and it’s important to do things the right way or you’re going to end up with a destroyed freecoaster that you can’t use. Check it out!

“Here’s how to properly adjust or change an axle on your Final Drive Freecoaster. This video shows you how to get the job done right with minimal tools. You aren’t always in a garage or shop when you need to make adjustments.”
[Read more…]

Profile Racing – Limited Edition “Wing P” Spectrum Colorway

May 24, 2016

Is it time for some new BMX Hubs or a stem? The crew at Profile Racing have just released their latest Limited Edition colorway on the Mini and Elite hubs, along with the Push stem in 48mm and 53mm reach sizes. The new colorway features their classic “Wing P” logo with a spectrum of colors, which appear to be other color options they have been offering their hubs and parts in currently or in the past.

There are only 55 sets of right and left side drive mini hubs, even fewer Elite hubs and Push stems, so if you’re looking to get a set, you will want to have your local BMX shop or favorite mail-order get you a set ordered up ASAP!

You can find full specs and details on the Mini and Elite hubs, and the Push stem on ProfileRacing.com
[Read more…]

Dan’s Comp – How To: Freecoaster Maintenance

May 9, 2016

Do you run a freecoaster? Do you know how it works or how to properly maintain it so it keeps rolling smooth? Well, you’re in luck because Dan’s Comp just released two videos teaching you about the two styles of freecoasters and how to properly take care of them to ensure they last. If that’s right up your alley, then hit play and take it all in! You’ll definitely learn something.

[Read more…]