Make your way on over to the Colony website to get a closer look at Mick Bayzand’s current 2015 Burma setup that he’s running these days! The Burma is his new signature frame for 2015 and it looks real good!
Product: Colony – 7075-T6 Alloy Wasp Drivers
Here’s a unique one we just spotted over on the Colony website. If you run their Wasp hub and are due for an upgrade for the driver or are looking for a little bit of weight savings, they have just released this new 7075-T6 alloy version for you to give a go. This driver weighs in at half the weight of their chromoly version at 2.1 oz. and comes in right or left side drive and 9-tooth only. This driver retails for around $59.99 are is available through all shops and mail-orders that carry Colony.
“We’ve had Chris Courtenay test these for over 6 months now & have stood the test of time. We’re proud to offer those who want a further weight saving the choice of a 7075T6 Alloy driver for our Wasp Hubs. Alex Hiam & others on the team all now swear by these drivers.”
Note: This driver is compatible with Colony’s Wasp hub only. Just incase you were thinking of trying it with other hubs.
You can find out more about Colony and their products by visiting their website — ColonyBMX.com.au
Colony – On the Road: Victoria
Colony keeping their On the Road series going! This time around we get a look at some of the footage the crew collected during their time in Victoria! If you are digging this, check out the video from the stop in Brisbane, Australian Capitol Territory and New South Wales!
“Here is the final raw video from our recent trip. Thanks to all the shops and crew that came out for a roll, we had a blast.
Riders: Zac Miner, Clint Millar, Jack Kelly, Mick Bayzand, Ricky Catanzariti, Bobbie Altiser and a special cameo from Crazy Leon.”
Product: Colony – Clone Freecoaster Hub
There’s no doubt that the freecoaster world has blown up huge these past few years and a number of brands have offered their own take on this popular hub working with the proven KHE internals. Colony introduced their Clone freecoaster a little while back now that features a CNC machined alumninum hub shell that was designed with a slimmer design to help reduce weight and a laser etched logo. As we said before, inside you can find a 14mm hollow chromoly axle and the popular KHE internals that a number of other hubs also use because, simply put, it gets the job done. The driver has an angular contact bearing for additional load support and they have included 3 slack washers to all you to get your hub set just the way you like it. The Clone freecoaster is available in colors of Rainbow and black, 36-hole only, right or left side drive with a 9-tooth driver and a weight of 1.26 lbs. (20.28 oz. / 575 grams).
Check out the black version along with an instructional video giving you a look at how to adjust the slack on this hub! below.
You can find out more about Colony and their products by visiting their website — ColonyBMX.com.au
Colony – On The Road: Australian Capitol Territory
Even though we just had flashbacks to high school when we read the letters “ACT”, we quickly discovered it meant the Australian Capitol Territory, which is the area around Canberra… That is where part 3 of the On the Road series from Colony takes us! After you check out the riding in this, watch the Brisbane clips here and the New South Wales clips right here!
“January 2015 we did 2 week trip between Brisbane and Melbourne hitting up a bunch of parks, shops and anything else along the way with some of the crew.
Here is a sort of behind the scenes look into the 2 days of the trip throughout the ACT (and Yass) along with some clips we didn’t keep for other projects.
Riders featured: Chris Courtenay, Bobbie Altiser, Zac Miner, Tom Stretton, Clint Millar, Ricky Cantanzariti and Luke Parker.”
Colony – On The Road: New South Wales
The Colony team have been bouncing around the east coast of Australia for their latest tour. They recently spent a few days in New South Whales where they cruised a few parks! Here’s 6 minutes of raw footage that they were willing to give up! If you like this, check out part one from Brisbane.
“January 2015 we are currently doing a 2 week trip between Brisbane and Melbourne hitting up a bunch of parks, shops and anything else along the way with some of the crew.
Here is a sort of behind the scenes look into the 3 days of the trip throughout New South Wales along with some clips we didn’t keep for other projects.
Riders featured: Chris Courtenay, Bobbie Altiser, Zac Miner, Tom Stretton, Clint Millar, Ricky Cantanzariti and Luke Parker.”
Colony – On The Road – Brisbane
The Colony team are bouncing around the East side of Australia for their latest team trip. They just dropped some raw scrap clips from the first 5 days from some of the sessions on Clint Millar’s mini ramp, some of the parks they rode and shop stops they did! Expect plenty more to come!
“January 2015 we are currently doing a 2 week trip between Brisbane and Melbourne hitting up a bunch of parks, shops and anything else along the way with some of the crew.
Here is a sort of behind the scenes look into the first 5 days of the trip along with some clips we didn’t keep for other projects.
Riders featured: Chris Courtenay, Bobbie Altiser, Zac Miner, Tom Stretton, Clint Millar, Ricky Cantanzariti, Dean Anderson, Polly, Keith Treanor and Luke Parker.
Shot by Cooper Brownlee.”
Colony – Have Fun Ride Bikes Tour Flyer
The Colony team will be making the rounds along the east coast of Australia January 10th through the 17th hitting shops and parks along the way! Check out the flyer to see if they will be coming your way! This is bound to be a good time!