Fiend BMX Archives – Page 5 of 19

Garrett Reynolds Video Bike Check

May 7, 2018

Get a closer look at Garrett Reynolds’ current Fiend setup!

Curious what Garrett Reynolds is rolling around on for a setup these days? Ride BMX caught up with Garrett for a new Video Bike Check where he gives us a full run through of his current Fiend and Cinema BMX setup with plenty of details on why he runs certain parts. There’s even a few sneak peeks in here like his new signature rims that he’s currently testing! Take a look!

“We all wish we could like Garrett Reynolds, but that just ain’t possible. But seeing as Garrett is such a nice guy, he went over all of his Fiend and Cinema parts for his bike check and explains why he sets his bike up the way he does. So at least you can build your bike just like his—as long as you’re not like six feet tall!

Frame: Fiend Reynolds, 20.75”, flat green tea
Fork: Fiend Process, 20mm offset, with invest cast dropouts.
Bars: Fiend Reynolds, 9” rise 27.25”—they come pre-cut because I hate cutting bars.
Stem: Fiend Reynolds V2
Grips: Fiend Team. I rub them on the ground before putting them on my bike to make them a bit more worn in.
Barends: Fiend
Headset: Fiend
Seatpost: Fiend
Seat: Fiend Reynolds with “Always Fiending” logo
Pedals: Cult, plastic
Cranks: Fiend Segments, 160mm
Sprocket: Fiend FND, 25-tooth
Chain: Factory generic
Front Tire: BSD 2.4”
Front Wheel: My signature Cinema rim sample laced to a Cinema VX2 hub with 2 CF plastic front hub guards.
Rear Tire: BSD Donnasqueak, 2.4”
Rear Wheel: My signature Cinema rim sample laced to a Cinema LSD FX freecoaster with CR and DR hub guards.
Pegs: Fiend Belmont plastic pegs 4.25”” – Ride BMX

Fiend BMX – Raul Jula “BCN Times”

April 18, 2018

Raul Jula gets down on the streets of Barcelona…

The winter has been a long, rough one for Fiend‘s connect, Raul Jula over in the Czech Republic, so he made his way to Barcelona, Spain to soak up the sun and endless spots thanks to TBB Bike! As you should know by now, Raul is a beast on a bike and he stacked a ton of great clips during his stay. Hit play and check it out!

“Raul is one ambitious guy, who basically follows his instinct and does what he wants to. It’s clear that one of these things is to progress on his bike as much as possible. Because of that he knew he gotta start the season right. And what could be better then spend 2 weeks in sunny Barcelona, when back home is freezing cold?

We’ve been chatting with Raul about the winter escape since…
…
GO CHECK THE WHOLE THING INCLUDING INTERVIEW AND PHOTO GALLERY ON OUR WEBSITE

FILMED & EDITED BY LUDEK SEDLAR (WDGF)

TUNE: XAVIER WULF – CHECK IT OUT”

Fiend BMX – Process IC Fork

April 18, 2018

Take a closer look at the Process IC Fork from Fiend…

Is it time for a new BMX Fork? Have you given the Process IC fork from Fiend? This fork is made from full heat-treated 4130 chromoly tubing with a one-piece machined steerer tube with an integrated bearing race with tapered legs and Investment Cast 6mm thick, 3/8″ dropouts with a 20mm offset. The fork also comes with a 7000 series alloy compression cap to keep everything tight.

The Process IC Fork from Fiend comes in Black and Chrome for colors with a weight of 2.18 lbs. and a price tag of $139.99 – $159.99 depending on color through BMX shops and mail-orders that carry Fiend BMX, or direct from the Fiend Webstore.

Available in Black and Chrome colors.

6mm thick, 3/8″ Investment Cast Dropouts with a 20mm offset.

What do you think of the Process IC fork from Fiend? Do you have any questions? Let us know what you think in the comments below!

Not quite what you were looking for? Check out more BMX forks here.

Garrett Reynolds “Fiending In Sydney”

March 26, 2018

Red Bull dropped a new video featuring Garrett Reynolds getting down in Sydney with Lewis Mills!

Red Bull just dropped this new banger of a video featuring Garrett Reynolds getting down in Sydney, Australia with Fiend teammate, Lewis Mills! You already know Garrett produced some serious bangers, but you might just be surprised with what Lewis brings to the table. If you weren’t familiar with his riding, you will be a fan of him after this. Either way, both of these guys produced some damn good riding, and Kalvin Kosovich crushed it behind the lens. MUST SEE for sure!

“Go down under with the Fiend team and BMX’s finest street sessions from Sydney, Australia.

“It’s now or never,” Garrett Reynolds said. “We’re almost 10,000 miles away from the US — you might not come back, you don’t know.”

Immediacy and uncertainty greet Reynolds and Fiend team members Lewis Mills and Calvin Kosovich in Sydney. Amid record high temperatures and rainfall, watch “Fiending Sydney” to see the current benchmark for BMX street riding.” – Red Bull

Colin Varanyak Video Bike Check

March 2, 2018

Get a look at Colin Varanyak’s Fiend setup!

Curious what Colin Varanyak is running for a setup? Here’s a video Bike Check where Colin gives us a full run through of his Fiend Varanyak setup loaded with Fiend and Animal Bikes parts! Check it otu!

“This one slipped into the YouTube black hole for a bit, but better late than never. Colin Varanyak gives you the rundown of his well-loved Fiend/Animal setup…

Height: 5’10”
Weight: 155lbs
Sponsors: Fiend, Animal, Etnies

Frame: Fiend Varnyak 20.75” Top Tube
Fork: Animal Street 15mm offset
Bar: Animal Empire Varanyak Bars
Stem: Animal Inverse
Cranks: Fiend Team 2.5 pc
Pedals: Animal Rattrap
Sprocket: Fiend Varanyak
Chain: Animal Hoder
Seat: Fiend Varanyak
Seat Post: Fiend
Front Wheel: Animal Prototype
Rear Wheel: Animal with Animal non-drive hub guard. BSD hub guard on drive side.
Tires: Animal GLH
Pegs: Animal Benny L” – Ride BMX

Raul Jula – Fiend X Animal Bikes

February 15, 2018

Raul Jula gets it done for Fiend and Animal Bikes in his latest video…

The crew over at TBB Bike dropped this new video featuring Raul Jula putting his current Fiend setup that’s loaded with Animal Bikes parts to work out on the streets of Romania! This is a bit of a video bike check, with plenty of detailed shots of the bike mixed in with the dialed riding. Hit play and take it all in! Raul doesn’t disappoint!

“Raul Jula managed to film some clips even in the cold out there in Bucharest, Romania.

Filmed/Edited: Eduard Danilovici” – TBB Bike

Garrett Reynolds – Fiending At Simple Session

December 16, 2017

Garrett Reynolds is heading back to Simple session…

As expected, Garrett Reynolds will be heading back to Simple Session in February! The crew at Simple Session caught up with Garrett to talk about why he loves going to the contest and what it means for BMX. There’s also a ton of great riding footage of Garrett from the Simple Session course! This is real good watch from start to finish! Take a peek!

“Beyond stoked to announce that 3-time Simple Session Champion and arguably the best street rider of ALL Time Garrett Reynolds will be back in Tallinn for the SIMPLE SESSION 18 in the first week of February 2018! Check this dope video by Dmitri Shushuyev where Garrett talks about what makes Simple Session special to him and about his approach to riding and life. Enjoy!” – Simple Session

E-Log – Fiending With Cinema

November 22, 2017

Check out this raw cut of footage from the Cinema and Fiend SoCal tour…

When you load up a van with the Fiend and Cinema teams, you know things are going to get crazy. Here’s a raw cut Ride BMX whipped up giving you a look at some of the riding and good times that were had, plus some words from the guys on what went down.

“I met up with the Cinema and Fiend squad as they cruised the streets of San Diego for a couple of days while on the #cinemaisfiending tour. Hit up a couple of demos, rode some spots, talked some shit…pretty much a typical BMX trip as they gathered clips for the now released “Escape To The Cinema” mixtape that you should watch right here.” – Ride BMX