John Corts Archives

Work BMX – Louisville Road Trip

October 26, 2021

The Work BMX crew loaded up for a road trip to Louisville, Kentucky to spend some time cruising the skateparks and street spots they came across along the way. Here’s 10 minutes of footage giving us a look at what they got into during their trip! It looks like they had a real good time to us with a ton of great clips to check out!

“WorkBmx would like to present to you our first official team trip! Brought to you by the master mind himself John Corts. This video was filmed over the corse of a 5 day road trip to louisville KY with a few skateparks stops along the way and a short visit to Cincinnati OH. Featuring riding from John Corts, Mike Corts, Brad Gibbs, Anthony Cuadros, Sammy Tedesco, Isaac Killingsworth, and Davey Osgood!”

Sweet Summertime Fun

May 4, 2021

Work Frames uploaded this gem from years back featuring John Corts and Dylan Cole road tripping from California to New York. This originally came out as an FBM Machine Shop video if I remember right. Either way, even though this is an older video, it’s still a good watch!

“After living in California for a couple years John made a video of himself and Dylan Cole on their trip home before getting to work in the FBM machine shop.” – Work Frames

Work Frames – 1888 Barn Session

November 16, 2020

Here’s a fresh upload from a session John Corts and crew got in on the 1888 Barn ramps! This raw cut features a bunch of guys getting in a proper session on what looks like a super fun ramp setup in the attic space of a barn. Hit play and take a look!

“Just a simple session at the barn. That’s all it was supposed to be, but then some bangers went down. Now enjoy this fun little vid.

Filmed by pretty much everyone
Edit by Tom Beckman” – Work Frames

Work Frames – State College, PA Day Trip

July 6, 2020

It looks like John Corts has got his new brand brand, Work Frames, up and running! After FBM shut down, John decided to give it a go and start producing his own frames. It looks like they’re ready to roll and some of the crew have been putting them to work! Here’s their first team video from a trip to State College where they rode the local park and and handful of street spots! We’re sure if John was behind these frames, they’re solid as hell! Check it out!

“We took a trip to State College, PA to meet up with AV from Grindworks BMX and Work team rider Brad Gibbs. The day was pretty darn productive so we decided a day edit was in order. Brad is rider the “Easy Street” Frame, Tom is on the “Squirrel Catcher”, and John is on the “Tempest”
Contact us or check the website for pricing and availability. ”

[Read more…]

FBM – Winter Warehouse Session

April 18, 2018

The FBM warehouse ramps have been getting proper use with all that snow on the ground in New York…

It’s been a brutal winter, especially up in the Northeast with the countless snow storms that have been pounding the area the past few months. Fortunately, FBM have a few warehouse ramps to make it a little more bearable. Here’s a video they whipped up from a session that went down with some of the team and family that keep FBM chugging along. It’s a pretty basic setup, but it looks like it leads to plenty of good times and dialed riding. If you want more, you can also check out a bunch of photos from the session RIGHT HERE.

“Late Winter FBM Warehouse/Machine shop Session featuring Garrett Guilliams, Curtis Cantwell, Shane Leeper, John Lee, Kenny Horton, and John Corts!” – FBM

FBM – Warehouse Vert Session

January 23, 2017

It wouldn’t be a proper BMX brand warehouse without a few ramps to ride, right? FBM have a few ramps set up in their warehouse out in New York and have ended up having some super dialed sessions on them. Here’s a video giving you a look at some of the riding that has gone down on what appears to be two narrow quarter pipes around the 7′ or 8′ height. Definitely some dialed riding and a few real rough slams. Either way, well worth checking this BMX video out!

“The FBM Crew at the FBM Warehouse and Machine shop…
Eric Holladay, James Lukas, Eric Hennessey, Garrett Guilliams, John Corts, Dylan Cole and even a cameo from Dennis McCoy!”

FBM – John Corts Weekend Cruise

December 9, 2016

It has been a little while since we’ve seen a BMX video out of FBM‘s welder, John Corts, but hes’ been out there crushing it. Here’s a video he put together of him and a few friends getting some time in on spots in Ohio! Take a look at what they got into!

FBM – Characters with Bikes: John Corts

May 14, 2015

FBM sent through their latest BMX video filled with goodness from the one and only John Corts! Check him out cruising parks and street spots all over from the East to West Coast!

“John Corts is a beast, simplest way to put it, as head welder at FBM, he works hard, rides equally hard and is exceptional at both. From a working class background John knew early on he wanted to become a welder, and at age 14 had already decided he wanted to make a career out of welding bikes. Through BMX, he has realized his passions for fabrication, and travel, as John says, his two great educators. Here is a self produced edit of John, his brother and his friends traveling and riding FBM built bikes!
Always Stoked…”