Merritt BMX Archives – Page 14 of 37

Montana Ricky Video Bike Check

February 16, 2017

Here’s a look at Montana Ricky’s brand new Cult setup!

It looks like Montana Ricky is no longer riding for Freed Bikes and is currently rolling on a brand new Cult setup decked out with parts from Merritt and Cult. Hit play to get a look at the bike being built up, then get the full run through of all the parts that he’s rolling around on. This is one dialed BMX bike! Check it all out!

“I got my new Bike Cult sent me and I decided to do a bike check and a rundown on everything. I’d like to thank Cult and Merritt for helping me out and getting me a whole new set up and bike to ride. For more check them out at

Filmed and edited by Scott Mcmenamin”

Merritt – Two Day Solo Mission In Barcelona with Anthony Panza

February 15, 2017

Anthony Panza spends a few days exploring the streets of Barcelona, Spain…

Anthony Panza coming through with a fresh video for Merritt from some solo spot exploring sessions that he caught during his trip over to Barcelona, Spain! Based off the video, it’s safe to say he didn’t have much trouble finding some great spots to ride and ended up stacking some real solid clips. It sounds like Anthony is working on a bigger video for Merritt that we would imagine he saved his best clips for, so get excited for that.

“Straight from Simple Session in Tallinn, Estonia to Barcelona, Spain. With only 5 days in Barcelona, I managed to film a video of myself cruising around the city of Barcelona within two days. Nothing too serious, just soaking up the beautiful environment and having fun. Be on the lookout for a Merritt Bmx part dropping soon. Shout out to my sponsors for making this trip happen. Ya’ll the best.” – Anthony Panza

Merritt BMX – How To Install Your Battle Cranks

February 14, 2017

Did you pick up the new Battle Cranks from Merritt? Here’s a video showing you how to properly install them!

Yesterday we gave you a look at the brand new Battle Cranks from Merritt, now today we get a little How To video explaining the PROPER way to install the cranks courtesy of Merritt with Mike Brennan and Dustin Lee. This video takes you through the tools needed, installing a bottom bracket, followed up by the proper steps of dialing these cranks in. Hit play and take it all in! After that, make sure you get the full specs and details on the Battle Cranks here.

Merritt BMX – Battle Cranks

February 13, 2017

Merritt have released their new Battle cranks that are designed to stand up to anything you can throw at them from street sessions to skateparks and trails.

Is it time for some new BMX Cranks? The crew over at Merritt have released their new Battle Cranks that are available through BMX shops and mail-orders worldwide now. The Battle cranks start out with fully heat-treated 4130 chromoly arms with wrap welded spindle and pedal bosses. The arms have a rectangle shape to help increase the overall strength and a laser-etched Merritt logo. The arms connect to a 22mm hollow chromoly spindle with chromoly bolts that also come with rubber plugs to help prevent the dreaded crank arm bite. To make things easier, Merritt have included the tool for installation and removal.

The Merritt Battle cranks come in black with lengths of 165mm, 170mm and 175mm, a weight of 33.8 oz. (without bottom bracket) for $179.99 through BMX shops and mail-orders now. Since both arms come with sprocket bosses, these are left and right side drive compatible. Note: These cranks do NOT come with a bottom bracket.

Check out more from from Merritt.

Merritt – Brandon Begin GFE Peg Promo

January 26, 2017

Merritt coming through with a fresh promo video featuring Brandon Begin putting his new signature GFE Pegs to the test on a bunch of rails and ledges! If you have ever had an issue with pegs spinning on you, these might just be what you’re looking for. Hit play and check out some dialed riding, then get the details below!

“Brandon Putting his signature GFE pegs to use. The GFe peg uses a special PA blend plastic sleeve that will out slide and out last other plastic pegs. we have also molded a steel washer into the peg sleeve to keep your peg and wheel in place. Available now in 4.75 and 4.25 at your favorite shop or mailorder.”

When Brian Foster Shows Up To The Warehouse Session

January 6, 2017

Dustin Lee dropped his latest video / Vlog, and the title did a great job of catching our attention. Brian Foster stopped by the Merritt warehouse to presumably dial in his bike with some new parts and catch a session on the warehouse ramps. Here’s a video giving you a look at what went down! The Brian Foster footage is from about 1:45 – 2:45 mark in the video. After that, Dustin catches an indoor session with Montana Ricky and a few others. Take a look!

Merritt – Yumi Tsukuda Welcome Video

January 2, 2017

Merritt have added Yumi Tsukuda to their line up over in Japan! Hit play to watch Yumi go to work on the streets, putting all four of his pegs to good use, along with plenty of style.

“Yumi joined to merritt bmx.

PRODUCED BY @horiegumi_jpn
RIDER: @yumingrow
FILM/EDIT: @daisuke_hre @4pegy“

FTL Crew Shreds Merritt Warehouse

December 18, 2016

Anthony Panza and some of the FTL crew decided to make a trip over to the Merritt warehouse to catch a session! Hit play to check out what went down from the quick basketball game to the riding and more!

“East coast weather has been frigid. Therefore myself and the OG “FTL” crew decided to dodge the cold and ride indoors. Thanks to the good fellas at the Merritt BMX HQ (Brennan & Ricky) for letting us shred the place! It was so much fun. What do you want to see next?”