BMX Union

Kink BMX – Brace Cranks

March 6, 2020

Kink have released their new Brace Cranks! These BMX cranks are a traditional style 3-piece crank with oval tapered tubing on the arms, sprocket bosses on both right and left arms, large radius spindle bosses and fully wrapped spindle and pedal bosses for strong, clean looking and ankle friendly arms. Inside you can find a hollow 48-spline, 22mm spindle and bolts that have a 3/8″ ratchet and 6mm broaches to make tightening these cranks down easy. The Brace cranks also have a TruTherm Post Weld heat-treatment that ensures these cranks will be strong and be able to withstand the abuse you’re going to throw at them while cruising street spots, skateparks or trails.

[Read more…]

Mongoose – Cam Peake In Arizona

March 6, 2020

Mongoose dropped this fresh edit featuring Cam Peake going to work on a few skateparks and street spots during some time he spent in Tucson while they filmed for the Mongoose In Tucson, Arizona video. Hit play to check out a bunch of front end balance, dialed lip trick combos and more! Cam doesn’t disappoint with this one.

“Mongoose rider, Cam Peake can do just about anything on his bike. He’s no stranger to big airs but can do some of the most difficult technical riding out there! Here are a few clips of Cam in Arizona when he was out there with the team for the Mongoose Am Jam in Tuscon.” – Mongoose

BMX News 3/6/20

March 6, 2020

It’s Friday and that means that it is time for Brant Moore to give you a full recap of all the best BMX videos, the latest news and a look at a few new products that popped up this past week! Brant put a good amount of emphasis on the tubeless tires which is pretty interesting as well. Hit play an check it out, then get a look at the full videos and all the links discussed in his recap down below!

[Read more…]

Tom van den Bogaard & Levi Weidmann @ Spot of Tallinn

March 6, 2020

When Tom van den Bogaard and Levin Weidmann roll up to a session, you know that you’re going to see something rad go down. Here’s a look at what these two threw down during a “jetlagged” session at Skatepark of Tallinn after a harsh 2 hour flight to Estonia for Simple Session. Despite this being a pretty laid back session, these guys still stacked some real solid clips for you to check out. Good mix of tricks and plenty of style!

“Two dutch lads ripping up the impressive Spot of Tallinn skatepark! Tom van den Bogaard & Levi Weidmann quickly got to work and sent some good lines.

Filmed by Martin Grainger
Photos by Adam Lievesley” – Ride UK

Fingers Crossed – Episode One

March 5, 2020

Here’s one we’re sure a bunch of you have been waiting for! The first episode discussing just what Fingers Crossed is all about! This video gets insights from Ruben Alcantara, Garrett Byrnes, Mike Bennett and Ari Cruz about these crazy BMX bikes modified to use suspension and bigger tires so you can ride on MTB trails, or regular BMX trails / spots with a little extra comfort. Not only that, but there’s a ton of great footage from sessions and a good look at the bikes! It’s a little bit crazy, but it’s an interesting idea and they seem to be really stoked on it.

What do you think about this idea? Do you want to see it go into production? Let us know what you think in the comments down below!

“FINGERS CROSSED BMX .
EPISODE ONE : LA IDEA

“13 years ago I had the opportunity to ride the bike park of Whistler with a mountain bike, I had so much fun but I was thinking all the time : I wish I could ride this on my bmx…after that I started to work on it but I couldn’t finished right and left it in a side…until now.. ” – Ruben Alcantara

With Garrett Byrnes, Mike Bennett and Ari Cruz

Thanks to Revolution Bikepark ?

? Salva Moreno (traxxmedia)
? Roberto Herruzo

Thanks to Ryan Navazio for the amazing shots”

The Wheel Mill – Ride Like A Girl 2020 Flyer & Details

March 5, 2020

Ride Like a Girl from Jon Lynn on Vimeo.

The Wheel Mill just dropped all the info on their annual Ride Like A Girl 2020 Jam that will be going down March 21st and 22nd at The Wheel Mill in Pittsburgh, Pennsylvania! This event is geared toward getting more women on bikes, and it always looks like a blast. Check out the promo video above, then get more details below!

“Ride Like A Girl is a Weekend to inspire and instruct women and non-binary riders in all things biking at The Wheel Mill in Pittsburgh, Pa! The event takes place on March 21st and 22nd. With legendary instructors including Carley Young, Nina Buitrago, Cory Coffey, Kathi Krause, Hillary Marques, Karen Brooks & Sally Sherman, riders can learn skills from fundamentals to expert BMX and Mountain Biking. We close the park down until 2pm to the public to help riders have room to grow.” – The Wheel Mill

You can learn more on The Wheel Mill Website or over on the Facebook event page! If you’re planning on attending this, you can get registration done RIGHT HERE!

Check out the flyer below!

[Read more…]

Support The 2020 Nowear BMX Contests!

March 5, 2020

As some of you know, the Nowear BMX crew out in Nebraska have been putting in a ton of work to build out a completely free for all indoor skatepark to ride. They’ve been doing some fundraisers over the course of the past few years and they’re getting super close to having the place all dialed in. They’ve been doing contests every summer and this year they have two in the works that will also double as a fundraiser for the park. Get full details on what’s in the works below!

“We are doing great at The Nowear Compound and are excited for what’s all in store for this year.
Our free indoor bike park project is going amazing and expect to have the park portion of the indoor done before this July.
We will then proceed to raise funds to finish the pump track room and final details.

We are hosting 2 big events this year with proceeds going towards our Nonprofit.

First event is July 18th Nebraska’s Cornhusker State Games and Nowear hosts the BMX freestyle contest at The Compound. The CSG organization provides us with EMT staff, porta potties and medals for all those who place. We are looking for additional sponsors to donate prizes to this event. This will be our first contest in the new indoor park.
https://www.facebook.com/events/2372132696411871/
There are 7 different classes at the event and 3 place per class.

Second event is our 7th annual Cornhuckit Jam Sept 19th. We will be promoting this event more than ever to raise maximum funds for our indoor project. If we are successful in doing so we should be able to finish our entire indoor pump track and all by the end of 2020. We will have live music throughout the day, camping available, food and product vendors, mini bmx comps and all weekend open riding. We are asking for any and all help with product and prizes for this event.
We will host a minimum of 4-5 mini events and give plaques and prizes to as many riders as possibly who do well for their own levels
https://www.facebook.com/events/1036643886714076/

Nowear will show appreciation by hanging up any banners that are sent, paint logos of company sponsors on our outdoor ramps that will remain there throughout the year and of coarse do lots of shout outs and thank you’s on our social media platforms.

NOTE: BMX companies who help with either events are welcome to set up a booth and sell product at no charge.

Fliers are being made currently for the events. When the artists have finished we will begin to add sponsor logos so please send us yours in an email so we can add them.

Thank you everyone for your consideration in helping Nowear continue to grow and help both riders and the local youth.

For any further questions please feel free to contact:

Karl Hinkley
Nowear BMX
853 N 18 Rd
Unadilla, NE 68454
402-875-3344”

Eclat – Devon Smillie Onyx Crank Promo

March 5, 2020

Eclat cooked up this short but sweet promo video featuring Devon Smillie putting the Onyx Cranks to good use. This promo is only 39 seconds, but you already know the riding Devon delivers is top notch, so hit play and enjoy! Check out more details on the Onyx cranks right here!

“The Onyx crank is the crank of choice for Eclat PRO Devon Smillie. Easily the finest and the most innovative 3pc Chromoly cranks to date, the Onyx cranks use an oversize super-hollow 24mm spindle, and a dependable 3pc design with a super-strong invest cast spindle and pedal boss, these cranks are designed to take the strain, stress and power of today’s most fierce riders.

Designed to be paired up perfectly with our new Onyx Sprocket (or any other sprocket on the market), the Onyx Cranks are also available in a shorter 165mm and 160mm option for street riders.” – Eclat

Note: This post contains affiliate links to Source BMX and we could receive a small commission that supports this website if you were to buy a set of cranks from their website that!