BMX wheels Archives

Odyssey – Matt Nordstrom Anodize Blue Hazard Lite Wheels Promo

April 26, 2021

Odyssey released this short but sweet promo video featuring Matt Nordstrom putting the new limited edition Anodize Blue Hazard Lite wheels to work out in the streets. This is mostly just clips of Matt absolutely crushing it, so even if you don’t need new wheels, this is well worth a look! Take a look!

“New limited edition Anodized Blue stock wheels available now in BMX shops worldwide. Find our classic Hazard Lite rim laced to either a Vandero Pro front hub, Antigram V2 cassette, and RHD or LHD Clutch V2 Freecoaster. Throw ’em on and start ripping, like Matt Nordstrom did.

Anodized Blue Hazard Lite rims also available.

Music:
DJ BUCKETZ – “GANGSTA LIMP”” – Odyssey

Odyssey – Murray Loubser and the Fluorescent Yellow Hazard Lite Rims

October 14, 2019

If you’re looking to brighten up your setup a bit, the new limited edition Fluorescent Yellow Hazard Lite rims from Odyssey should do the trick. These rims are now available on Odyssey’s complete wheels and can be picked up at BMX shops and mail-orders that carry Odyssey world wide now. Check out this promo featuring Murray Loubser putting his new wheels to good use!

Want to pick up a setup? Source BMX have the wheels in stock now. Check out the Hazard Lite Cassette Wheel, the Hazard Lite Front Wheel and the Hazard Lite Freecoaster wheel.

You can also pick up just the rim here — Fluorescent Yellow Hazard Lite Rim

“New limited edition Fluorescent Yellow stock wheels available now. Throw ’em on and start ripping. Flo Yellow Hazard Lite rims also available” – Odyssey

Note: This posts contains affiliate links and we could receive a small commission from Source BMX if you were to purchase the wheels or rims from them. We would never promote a product we weren’t completely stoked on.

Cinema BMX – Reynolds FX2 Freecoaster Wheel

June 17, 2019

Is it time for a new back wheel for your setup? Here’s a look at the Garrett Reynolds signature FX2 Freecoaster Wheel from Cinema BMX that might just be what you’re looking for. This wheel starts out with the Cinema FX2 Freecoaster Hub and is laced using 14-gauge stainless steel spokes and brass nipples with a 3-cross pattern to the Cinema Reynolds Rim that is bound to make for one strong and reliable wheel. This wheel also comes with the Cinema CR and DR nylon hub guards to protect both sides of your wheel which is always key if you’re grinding.

The Reynolds FX2 Freecoaster wheel is available in Right or Left Hand Drive with a 9-tooth driver in Black on Black or a Polished hub laced to a Black rim for $259.99 through BMX shops and mail-orders that carry Cinema BMX worldwide now!

You can also find this wheel in the Cinema Webstore if you don’t have a local shop or favorite mail-order that carry Cinema.

This wheel is good enough to have Garrett Reynolds’ name on it, so unless you’re throwing down heavier riding than he is, there’s a good chance this freecoaster wheel can hold up to whatever you’re going to throw at it!

What do you think? Do you have any questions? Let us know what you’re thinking in the comments below!

GSport – Elite FC Rear Wheel

January 20, 2018

GSport have released their new Elite FC rear wheel for you to get your hands on…

Is it time for a new rear wheel? Are you looking for a freecoaster wheel that is all built up and ready to go? You are in luck because GSport have just released their new Elite FC Rear Wheel that will definitely get the job done for you. This wheel pairs the Odyssey Clutch V2 freecoaster hub with an the GSport Rollcage Rim. This wheel pairs the reliable and durable hub with a strong rim that will hold up to whatever you throw at it while cruising the streets or skateparks.

The Elite FC Rear Wheel is available in Right Hand Drive or Left Hand Drive for $274.99 through BMX shops and mail-orders that carry GSport worldwide now. If you’re looking for a front wheel, this one pairs up well with the Elite Front Wheel that was revamped last year!

Below you can find more details on the Odyssey Clutch V2 freecoaster hub…

“The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec.

Features
14mm chromoly axle bolts on both the drive and non-drive side for greater reliability
Maximum strength axle design
Super-durable bearing arrangement throughout
2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required.
Super-durable drag mechanism design
Crankflip ready
Protected by US Patent 9,469,157
Protected by Taiwan Patents M487850, M487851, M502583” – Odyssey BMX

What do you think? Do you have any questions? Let us know what is on your mind in the comments below!

GSport – Roloway Hub and Elite Front Wheel

April 27, 2017

The new Roloway hub and Elite front wheel have arrived…

GSport have released their new Roloway Hub for you to get yourself rolling smooth once again. This Front BMX Hub stars out with a 7075-T6 aluminum hub shell with precision bored fully concentric bearing seats for a smoother spin and prolonged bearing life. Inside you can find 6804RS sealed cartridge bearings, a 20mm 7075-T6 aluminum center axle with steel helicoil thread inserts and 3/8″ heat-treated chromoly axle bolts with 17mm wrench flats and 6mm hex slots to keep everything nice and tight.

The Roloway hub comes with replaceable plastic hub guards on both sides that are included with the hub.

You can pick the Roloway Hub up in Black or Polished with a weight of 12 oz (340 grams) and a $79.99 price tag through BMX shops and mail-orders that carry GSport worldwide now.

Note: We have updated our BMX Spoke Calculator to include the Roloway hub so you can find the spoke size you need for your rim.

Maybe you’re in need of a whole new front wheel. GSport now have their Elite Front Wheel available that has the Roloway Hub laced to their Birdcage Rim that you can pick up for $174.99 through BMX shops and mail-orders that carry GSport worldwide as well.

Check out more from GSport.

Quintessential Guide On How To Build A BMX Wheel

February 5, 2017

How to build a BMX wheel? The guys at The Merged can teach you.

How To Build A BMX Wheel

Looking to build up your own BMX wheel, but you’re not quite sure how to get it done? The guys over at The Merged have put together a SUPER in-depth guide on exactly how to build a BMX wheel from start to finish. They cover everything from the basic concepts, the tools you need, lacing patterns and more to make sure you get your wheel rolling straight. If you’re looking for a guide on how to build a BMX wheel, then you will DEFINITELY want to check this one out. You can take in the whole guide over on The Merged website — The Quintiessential BMX Wheel Build Guide

How To True a BMX Wheel Without a Truing Stand

December 16, 2015

If you have been riding BMX for more than a few days, there’s a good chance you have had your wheel knocked out of true. Whether it be side to side or a hop which is up and down, it happens. BMX is aggressive and it can put some serious abuse on those 20″ wheels of yours. When that happens you’re usually left with only a few options; take it to a shop and have a trained professional do it (recommended), buy or borrow a truing stand and fix it yourself (which we only recommend if you know what you’re doing) or try and eye ball it, which can work in some cases. Today, our friend and FBM and Madera team rider, Mike Hinkens posted a photo on Facebook giving us a look at a a method he uses to true his wheels that is quite a bit more cost effective than buying an actual truing stand. We we’re pretty stoked on the idea, so we decided to give it a go to see if it works and figured it would be cool to show you how to get it done yourself if you’re in a pinch!

[Read more…]

Print Ad: Demolition Parts – Rob Wise

March 16, 2015

Here’s a look at Demolition‘s latest print ad featuring Rob Wise and their Rotator freecoaster and their Bulima wheelsets. If you didn’t catch Rob Wise’s new Demolition Wheelset Promo, we advise you hit that link and give it a watch!

[Read more…]