BMX UNION

The latest BMX Videos, Products and News!

  • BMX Videos & News
  • BMX Color App
  • Submissions
  • Home
  • Spoke Calculator
  • Products
    • BMX Frames
    • BMX Bars
    • BMX Fork
    • BMX Stem
    • BMX Grips
    • BMX Headset
    • BMX Cranks
    • BMX Pedals
    • BMX Sprocket
    • BMX Chain
    • BMX Bottom Bracket
    • BMX Seat
    • BMX Seat Post
    • BMX Hubs
    • BMX Rims
    • BMX Tires
    • BMX Pegs
    • BMX Hub Guard
  • Featured
    • Interviews
    • Bike Check
    • BMX Videos
    • Photogalleries
    • BMX Reviews
    • On the Horizon
    • Through The Lens
Kink BMX Royale Frame

John Povah No Longer Etnies Team Manager

July 6, 2018

Well, here’s some pretty insane news. It looks like after 16 years, John Povah is no longer the team manager for the Etnies BMX program. We’ve been hearing there have been some changes and shake ups going around at Etnies for a while, and this is probably the biggest news that we’ve seen come out of it. John has been the key role in creating some of the best teams in BMX over that time span, produced a few videos you may have heard of for Etnies like “Forward“, “Grounded” and “Chapters“, bringing on riders like Taj Mihelich, Joe Rich and Ruben Alcantara to guys like Aaron Ross and Nathan Williams, and has been behind making a lot of great things happen for the brand and BMX in general. It sounds like John is leaving on a fairly positive note, but it doesn’t sound like he has a for sure plan of what’s next. We would imagine now that the news is out, it won’t be long before he gets a few offers. We’ll have to see what comes from this. Check out the post from his Instagram to bring the news…

Man, that seriously went by in the blink of eye !! 16 years in the bag and now on to a new chapter. I can’t thank @etnies enough for everything you’ve done for me, you’ve had an immeasurable impact on my life. You taught me a lot, you’ll always be part of who I am, I’m forever grateful. Thank you for allowing me to be an integral part of a brand with so much passion, it’s awesome, an amazing era in BMX and exciting to be a part of, BMX is definitely better for the brand being involved in it. And thank you to everyone in BMX who’s been supportive of me and what I brought to the #etnies brand in my time there, I’m humbled. There’ve been so many great times, memorable trips, accolades and so much achieved, I’ve honestly lost count, and with some of the best riders in the game, period ! Along with too many smart and talented people behind the scenes over the years to count, I’ll definitely miss that feeling of excitement for a new project and accomplishments that come with it, we were a great team. I’m excited to see what’s next for the brand, I’m sure it’ll be next-level as always. But as for me, I’ll be on the sidelines with etnies for a short while longer, at least for the next couple of months as a consultant, doing social media etc, but after that ? …. I’m excited and anxious for what the future holds ?? . . Much love ❤️

A post shared by John Povah (@john_povah) on Jul 6, 2018 at 2:07pm PDT

Insight: Terrible One – Cyclops Stem

December 6, 2016

The Cyclops stem from Terrible One has arrived!

terrible-one-cyclops-stem-colors-bag

Over the years there have been countless products released, but anyone that has been riding for a long time knows not every great idea makes its way into production. Most of those ideas and designs are forgotten, but every now and then there are these parts that almost become this most sought after thing that NEEDS to be released. There has been a lot of talk about “Mid School” lately, and it’s safe to say any and every Mid School guy will tell you that the Cyclops Stem has almost become this unicorn of a product that people really wished it would eventually come out, but kind of lost hope. Over the years there had been rumors that it was done, that it would be available, but then it would disappear again and those hopes and dreams were once again shattered. Well, today we’re excited to tell you that the wait is over and the stem is now available in a very limited edition first run. We got ahold of Joe Rich to get the full scoop on the now available Cyclops stem and what it took to get to this point… This still doesn’t seem real.

Alright, Joe! Yesterday you made an announcement that probably caught some people off guard. How long have you been waiting to release the Cyclops stem now?
In all honesty, we’ve been working on these stems for over 9 years now. So this is a very long time coming to say the least. ha ha

Over the years the design has changed a bit, right? What were some of those changes? Care to take us through the history a bit?
John Povah originally came to me with the concept for how the stem worked. At the time it was a rough sketch and an idea. I talked to Phil Wasson from SuperRat Machine about it, as he was making our American Flyer sprockets at the time. He was interested in taking a crack at it. We got the first samples fairly quick. They worked pretty good, but they had some flaws. The wedges were way too small to hold the steer tube properly. And it was our first try at what angle that the wedges work on. So I redesigned the shape of the wedges with an idea I felt could work better. From that point Povah, Phil and I all worked together with refining all parts of the stem. Slowly things started taking shape, and it resembled more and more how they are now. With each sample that we had done, they progressed both in function and the visual appeal. The wedge size, wedge angle, material grade, and the tolerance of them, took the most fine tuning. We did several samples over our time with SuperRat. And of course as luck would have it, when things took a nose dive. We had a complete version of the stem that we were finally happy with, and were ready to go with, and SuperRat basically went belly up. It just vanished seemingly into thin air.

terrible-one-cyclops-stem-black-top

I know you worked with a bunch of different places to try and make this stem happen. How many different people did you work with prior to finally finding the winner?
Phil at Super Rat Machine, and Ken Spaulding with Zodiac Eng. were the 2 main ones. After things hit a dead end with Phil, I had a working sample, but that was it. No technical drawings for anyone to go off of. My friend Jimmy Rathbun gave us the first glimmer of light, as he managed to reverse engineer a drawing from the one good sample we had. I met Ken Spaulding and his partner John at Interbike in 2010, they came to our T-1 booth one day during the show. We talked for a bit and eventually got on the subject of the stem, they were very interested in taking the Cyclops project on. We worked for a good bit on dialing these in with them. The drawings that Jim had done for us were fine tuned even more as we started moving forwards with samples . We had a few runs of samples done and once again. We got to the point where we were placing the order, when Ken and his partner split. Ken had been doing all of the drawings and technical info, and his partner was working at the shop that actually made the samples. There are too many details to go into, but after working with Ken for a good number of years trying to make a run of these to happen, we hit a dead end as well. After that I was feeling very deflated. I talked to a lot of other machine shops about them, and either they were too expensive at the time, or just couldn’t make the stem. . . That was until Jimmy Wood, and Iron Gate Machine saved us !

Could you have done this in Taiwan or China or was it strictly an American made project?
Stems are the one thing that I’ve always felt a difference when tightening down bolts on a American made stem. I don’t really know how to explain it, but when you tighten the bolts, they just have this really good feel to them. Strange that tightening a bolt can feel different, but it does. Of course other places could do them, and I’m sure they’d be good, but some feelings you just can’t shake, and that’s why I never could quite commit to going that route. Plus, anytime you can work with a manufacturer, that has a rider with the skills to be in charge of a project, is such a good feeling for me. I really feel like there is that little extra bit of universal magic that goes into it when those circumstances are present.

terrible-one-cyclops-stem-black-front

How did you come across the company that made the Cyclops stems that are going to be available soon?
I thought things were pretty much over with the possibility of having them made here in the states. I did an interview with you earlier this year, back when the ramp was coming down and you asked me a question about the stems then. A rider from Washington, Jimmy Wood, read that article and contacted me. He worked for a very dialed machine shop named Iron Gate Machine, and was certain they could help breathe some life back into these. So thank you so much Kurt for doing that interview with me. Without that, this may not have ever happened ! In a very short amount of time they had a working sample to me. The stem body was perfect straight away. The wedges took some fine tuning and a few more samples until we reached the point we are at now. This all happened in a few months time so its very surreal to me after the amount of time, and ups and downs these have been through. I can’t thank Jimmy and Iron Gate enough. Every time I talk to him I try and express how much this has meant to me. They have been an absolute pleasure to work with. They care about every last detail the same way I do. So stoked. After all that time, all I wanted to do was at least have a few done that worked right and were available. If no more ever happened besides that, I would at least have had some good closure with this.

terrible-one-cyclops-stem-black-front-close

Did you have to make any changes to the previous design to make this one happen?
Just more fine tuning on the tolerances on the wedges. Jimmy was really really helpful with all of this. They are pretty exact and are meant to compress a certain amount. Its very finicky. I guess the only problems that really can come up with this would come from the fact that we don’t make our own forks and can’t quality control the diameter of for steer tubes. And one thing I learned during this whole process, is that all fork steer tubes are not the same. They vary in steer tube diameter quite a bit. And that makes developing a part, and how it works, to an exact spec is quite tricky.

Can you give us the full specs and details on the Cyclops stem?

  • 2.087″ (53mm) reach
  • .4031″ (10.2mm) rise inverted
  • .9094″ (23.1mm) rise top load
  • Standard 5/16-18UNC Grade 8 – bolts
  • Stem body – 6061 Aluminum
  • Wedges – 7075 Aluminum
  • Colors available – Black / Silver for life!
  • Weight – 10oz.
  • terrible-one-cyclops-stem-black-back-side-angle

    How many of the stems will you have available? Do you plan on doing another batch if they sell quick or is this a one and done kind of thing?
    I got 50 stems done this time. It was a number that I felt comfortable with. I have NO idea what people will think after all these years. At one time, I know there was a lot of interest, but that was a long time ago, and a lot has changed since then. There are way more options out there, and there is going to be a certain type of person that gravitates towards picking one of these up. There are a few steps you have to take to install them as well. But, these are the best versions of this stem in the 9 years we’v been working on them. The last part of that sentence sounds absolutely ridiculous ! But I’m very proud of these to say the least.

    terrible-one-cyclops-stem-silver-front-close

    How can people buy one of these stems and what is the price? Will they be available through shops or mail-orders like Empire, or are you doing a direct sale kind of thing similar to the SFA frame?
    People can either get them directly from us on our online store, or from a T-1 dealer ( shop or mail-order). We weren’t able to offer these to any of our distributors due to how much they cost us. They just couldn’t fit into the pricing pyramid of distro to shop to rider. There wasn’t enough room in there price wise. So the only way to do them, without making them a LOT more expensive than other stems, we had to cut out one step. Price on them is $85.00

    UPDATE:

    The Cyclops stem has sold out already. There are more that will be ordered. We suggest you give Terrible One an email or call if you want to order one.

    Now that you finally have released a stem that has almost “cursed” you for nearly a decade, do you feel the pressure is finally off your shoulders?
    There was never any pressure I felt from it, I just love these stems and was frustrated that one thing after another seemed to take a turn for the worse at the exact step I thought they were going to happen. So many times I thought they were really happening, and I was let down time and time again. It was pretty tough. I’m very emotionally invested in everything we do. Its not just another product. Turning what were just ideas, into realities, is one of the best feelings. I love this stuff.

    terrible-one-cyclops-stem-silver-back

    What’s next for you? Any new Terrible One products in the works you can tell us about? What about trips, filming projects and more?
    Yep, there are a few things in the works, but ever since the experience we’ve had with the stem, I’m very hesitant to say anything, until things are more solidified and happening. Ha ha. I’m sure you can understand.

    That about wraps things up! Anything else you want to say?

    Thanks for taking the time to read this !

    terrible-one-cyclops-stem-silver-side-angle

    Below you can find a How To video Joe put together on properly installing the stem. Due to the design, there is a little more to how you install this one than a traditional BMX stem. Take a peek!

    Fly Bikes – Coastin’ – Full Video

    January 10, 2014

    coastin_600x

    Head over to the FLY BIKES website to take in all 19 minutes and 21 seconds of pure gold from their “Coastin'” video that Lee Turner produced. They have a full microsite that has photo galleries, wallpapers and more to go along with the video, so click here already!

    Etnies’ John Povah Chats with Blackout BMX

    December 4, 2013

    The guys at Blackout Distribution caught up with Etnies Team Manager, John Povah, to talk about the brand, the products, the people involved and future projects. Take a peek!

    “QUESTIONS: 1, Etnies content – 2, The Valley Shoe –
    3, Working for Etnies – 4, Don Brown?
    John Povah from Etnies talks about his history with BMX and
    the time he has spent working with Etnies.
    Povah also mentions some of Etnies plans for the near future.
    Enjoy this interview and the others to come including interviews with:
    Kink, Cinema, Tree and our own BlackoutBMX sales rep Chris Riesenberger
    “

    Sneak Peek: Terrible One – Cyclops Stem

    June 12, 2012

    Terrible One posted up this photo of the sample Cyclops stem that Etnies team manager, John Povah, has setup on his bike. From what I’ve been hearing, the stem should actually finally be out real soon… Seriously! I need to get my hands on one as soon as they do come out…

    Clicked – Sponsored Yet?

    August 23, 2011

    Mike over at Clicked asked John Povah, Jay Roe, Steve Crandall and Adam22 what it takes to get sponsored these days. Anyone who’s hoping this link holds the key to their fame is probably trying to hard…

    Nathan Williams and Corey Martinez on Etnies Apparel

    April 28, 2011

    It looks like Nathan Williams and Corey Martinez are getting the full hook up from Etnies. Not only will they be rocking their shoes this year, they will also be wearing their apparel as well. Here’s a few words from the dude, John Povah.

    “Etnies is committed to BMX and its growth. With the progression of the team, it was only natural that etnies have BMX riders on footwear and apparel, representing etnies head to toe. Nathan Williams and Corey Martinez are two very talented riders that bring their own unique approach and style to BMX. Please welcom Nathan and Corey to Etnies apparel” – John Povah / Etnies BMX Team Manager

    Brad McDonald – Random Photos from 1990-1992

    March 24, 2011

    Vital BMX owner, Brand McDonald has been digging up a ton of his old photos from back in the day that he shot. Brad recently posted a gallery featuring photos from 1990-1992 with names like Mat Hoffman, Dave Mirra, Dennis McCoy, Jay Miron, Fuzzy Hall, Robbie Morales, John Povah and more that you can find. Hit this link and take a look.

    • 1
    • 2
    • Next Page »
    Kink Royale Frame

    Affiliates & Supporters

    Kink Bikes
    Vans
    Source BMX
    Etnies
    Life Brand
    35th Anniversary RAD Posters
    Note: This site contains affiliate links and we could receive a small commission that supports this site if you were to make a purchase on their websites using our links for no extra charge to you.
    Home
    Daily BMX Videos & News
    BMX Color App
    BMX Spoke Calculator
    Submissions
    Advertise
    What Is BMX? What Does It Mean?
    What Does A Warranty Cover?
    BMX Frame Geometry Guide
    BMX Handlebar Geometry Guide
    BMX Tool Guide
    BMX Multi-Tool Guide
    BMX Frame and Parts Guide
    5 Keys To Keeping Your BMX Bike Dialed
    Rad - Full Movie
    Privacy Policy
    Affiliate Disclosure
    Join Our Email List

    Copyright © 2022 · BMX UNION - All Rights Are Reserved.

    pixel