S&M bikes Archives – Page 59 of 81

Product: S&M Bikes – Fu Bar

July 9, 2015

Are you on the hunt for some four-piece bars? Have you given Charlie Crumlish‘s signature Fu Bars from S&M Bikes yet? These bars are made right here in the U.S.A out of 4130 chromoly tubing with two versions available; 9″ rise and 10″ rise.

The 9″ rise Fu Bars feature a 29″ width, 10-degrees of backsweep, 1.5-degrees of upsweep, an 0.75″ crossbar and a weight of 2.68 lbs.
The 10″ rise Fu Bars feature a 30″ width, 10-degrees of backsweep, 1.5-degrees of upsweep, an 0.75″ crossbar and a weight of 2.73 lbs.

The Fu Bars are available in matte black, clear coat raw and chrome through all BMX shops and mail-orders that carry S&M Bikes worldwide for around $59.99 – $69.99.

[Read more…]

Darryl Nau Video Bike Check

July 7, 2015

We’ve seen a lot of Bike Checks over the years. Most pretty standard in format, others a little more creative… But we’re 99% sure this is the first time a bike check has been filmed at a strip club? Either way, here’s an interviews video bike check with Darryl Nau and his S&M Bikes ATF setup that he’s running. Darryl is one of a kind and we love it!

“Darryl Nau’s ATF bike check was filmed quite a few months ago, but the footage just found its way out of the champagne room, so without any further ado… feast your eyes on this babe!

Frame: ATF 21”
Fork: Widemouth Pitchfork
Bars: Grand Slam
Stem: Challenger
Sprocket: L7
Seat: Coxie Directors
Seatpost: Long Johnson
Tires: Mainline (front) / Speedball (rear)
Grips: Fitbikeco.
Rims: Revenge
Pegs: Fitbikeco.
Pedals: Fitbikeco.
Chain: KMC
Headset: Revenge
Extras: S&M Padset

Filmed/Edited by: Charlie Crumlish”

[Read more…]

Will Gunn Bike Check

May 5, 2015

S&M Bikes caught up with their Australian connect, Will Gunn, to take a closer look at his current MOD setup that he’s running down under! Hit the flipbook above for a look at that sturdy looking BMX bike that’s built for speed and style!

[Read more…]

Giveaway: S&M Bikes – Hoder Grips

May 1, 2015

Are you on the hunt for a new pair of grips? Have you seen Mike Hoder’s new signature grips from S&M Bikes yet? Most likely you haven’t because they were just released today! These grips are made right here in the U.S.A by ODI grips out of a super soft rubber compound with a wavy pattern that has an S&M Shield and Mike Hoder signature on the ends. These flangeless grips are 160mm long and come in colors of black, clear and green with matching plastic plug bar ends!

GIVEAWAY:

We’re going to make this GIVEAWAY super easy and all you have to do is leave a comment at the bottom of this post and tell us why you want to win the grips! Whoever comes up with the best answer that leaves us laughing our asses off will probably take the win! We’ll toss in a ton of The Union stickers and more to go with the grips. Check out more photos after the jump! We will pick a winner Tuesday, May 5th!

[Read more…]

Hobie Doan Bike Check

April 22, 2015

We’re not too familiar with Hobie Doan, but if Shad at Goods BMX is putting him out there, you know he’s gotta be good! Check out this bike check S&M Bikes dropped giving us a closer look at his current setup! We have a feeling we’ll be seeing more of this guy in the future.

“Our main man Shad at Goods BMX in Portland shot over this bike check of young blood Hobie Doan on his WHAMMO. Hobie is a shredder, so we’re throwing him in the van with us again this weekend when we head to Santa Fe. If you’re in the area, roll thru the Shop Stop we’re throwing at Rob and Charlie’s on Saturday!”

[Read more…]

Product: Terrible One – Classic U.S.A Bars

April 15, 2015

Here’s a gem we spotted over on The Merged! It looks like Terrible One have decided to do a run of their Classic bars here in the U.S.A through the fine fellas at S&M Bikes! The Classic bars are made from straight gauge 4130 chromoly with an 8.85″ rise, 29.25″ width, 12-degrees of backsweep and 3-degrees of upsweep. It would appear that they are available in chrome only, but we could be wrong on that.

The Classic U.S.A bars are available for $84.95 in the Terrible One Webstore or through Let’s Roast, Pusher BMX, Mauls Bike Shop, Empire BMX, Circuit BMX and Dan’s Comp!

[Read more…]

Product: S&M Bikes – Mike Hoder “BTM” Wrap

April 14, 2015

We gave you guys a look at the new Mike Hoder signature “BTM” wrap from S&M Bikes last week, but now we have an even better look at the Enduro stem, X-Man sprocket and X-Man Guard sprocket! Check it out in the flipbook above, then hit your favorite S&M dealer and pick some up!

[Read more…]

Product: S&M Bikes – X-Man Guard Sprocket

April 9, 2015

Time for a new sprocket? Have you given S&M Bikes’ X-Man Guard sprocket a look? This sprocket is CNC machined out of 7075-T6 aluminum right here in the U.S.A with 1/8″ teeth, a 24mm center bore, two S&M Shield logos and S&M Bikes logos and two crank mounting holes for extended life. The X-Man Guard sprocket comes in black and a limited edition Mike Hoder signature BTM wrap with sizes of 25 tooth and 28 tooth available.

This sprocket is available through all shops and mail-orders that carry S&M Bikes worldwide with a price tag of $65.99 – $79.99.

You can find out more about S&M Bikes and their products by visiting their website — SandMbikes.com

[Read more…]