BMX Union

Billy Perry 2016 Video Bike Check

October 4, 2016

Billy Perry coming through with a video Bike Check giving you a look at his current Volume Bikes setup decked out with Merritt parts. We’re assuming this was filmed before Billy broke his ankle since he’s not back to riding just yet, but there’s some real solid riding clips mixed into this. Billy is also running a prototype Volume frame, so we’ll have to keep an eye out for that. Hit play and enjoy!

We want to hear from you! Let us know what you think in the comments below!

VISIT: FRONT PAGE // DAILY SECTION // BMX COLOR APP // BMX VIDEOS // RANDOM // BMX Games

Andrew Micks Tape

October 4, 2016

Here’s a fresh mix of footage that Andrew Mick compiled from clips he filmed over the course of 2015 into 2016 out on the streets and at a few skateparks. This also has a bunch of other bikes and a few cameo appearances from other riders. This has a really chill and laid back vibe, but it’s well worth the look! Check it out!

We want to hear from you! Let us know what you think in the comments below!

VISIT: FRONT PAGE // DAILY SECTION // BMX COLOR APP // BMX VIDEOS // RANDOM // BMX Games

Fit Bike Co. – 2017 Corriere 1 Complete

October 4, 2016

Have you given a look at the new 2017 complete bikes from Fit Bike Co. yet? Here’s a look at the Ethan Corriere signature Corriere 1! This bike starts out with a frame with chromoly top, down and seat tubes. The frame has a 75.5-degree head tube angle, 71-degree seat tube angle, 11.8″ bottom bracket height, 8.8″ standover height and a 13.11″ chainstay length. You can find an integrated head tube, down tube gusset, integrated seat post clamp and a Mid bottom bracket on the frame. The fork has a chromoly steerer tube with tapered legs and 3/8″ dropouts with a 33mm offset. The bars are hi-ten steel with a chromoly crossbar, 9″ rise and 29″ width. The rest of the bike comes with Fit Bike Co., Revenge and Odyssey parts…

Stem: Fit Bike Co. Top Load
Grips: Fit Bike Co. – Benny
Cranks: Fit Bike Co. – Indented CrMo 170mm 8 Spline LHD
Bottom Bracket: Sealed Bearing Mid
Sprocket: Fit Bike Co. – Chromoly Series One 25-tooth
Pedals: Odyssey – Twisted PC
Chain: KMC Z410HX
Seat: Fit Bike Co. – Solo Tripod
Seat Post: 200mm Tripod
Front Wheel: Alloy Sealed 3/8″ axle laced to a Revenge SW1 36-hole rim
Front Tire: Fit Bike Co. – 2.40″ T/A Tire (65 PSI)
Rear Wheel: Alloy Freecoaster Left Side Drive – 9-tooth driver laced to a Revenge SW1 36-hole rim
Rear Tire: Fit Bike Co. – T/A Tire (65 PSI)
Pegs: None
Brakes: Alloy 990 U-Brake

The 2017 Corriere One complete from Fit Bike Co. comes in Root Beer for the color, a top tube length of 20.5″ and a weight of 25.8 Lbs. for $439.99 through BMX shops and mail-orders that carry Fit Bike Co. worldwide now.

Benny grips

Topload stem

Fit Bike Co. Solo Tripod seat

KMC chain on a Fit Bike Co. 25-tooth sprocket and Indent cranks.

Removable brake mounts

Fit Bike Co. T/A 2.40″ (65 PSI) tire.s

We want to hear from you! Let us know what you think in the comments below!

VISIT: FRONT PAGE // DAILY SECTION // BMX COLOR APP // BMX VIDEOS // RANDOM // BMX Games

ABQ DNV – Matt Gutierrez Instagram Mix

October 4, 2016

The ABQ DNV crew coming through with a fresh batch of Matt Gutierrez Instagram clips for your viewing pleasure! Matt brings a ton of grinds, nose balance and style to the table for this one and he manages to keep things interesting from start to finish with the different skateparks and spots he rides. Check it!

“Matt Gutierrez needs no introduction to our ABQDNV channel. He sent through an amazing mix of his favorite Instagram clips and needless to say it’s nothing short of creative and tech gold. We have been working on a video while he’s been up here in Denver and this can give you a taste of what to expect. Give it a watch and hit that subscribe button.”

We want to hear from you! Let us know what you think in the comments below!

VISIT: FRONT PAGE // DAILY SECTION // BMX COLOR APP // BMX VIDEOS // RANDOM // BMX Games

Eclat – Raven Rim

October 4, 2016

Here is a look at a new BMX rim we spotted at Interbike 2016 from Eclat. The Raven rim is made from 6069-T6 alloy with a 36mm width, extra rounded edges to help prevent pinch flats, extra thick sidewalls to help resist denting, a deep channel to make it easier to install or remove tires, a lower profile sidewall with a slight angle for looks, but still brake compatible and extra thick, offset spoke holes for strength. The Raven rim is flash welded at the seam. One of the best ways to go viral on tiktok is to buy tiktok followers , it is fast and secure and will help you boost your tiktok.

The Raven Rim will be available in a glossy black color and an Alex Kennedy inspired Neon Yellow — which you can get a look at Interbike 2016 – Eclat — through BMX shops and mail-orders that carry Eclat worldwide!

We want to hear from you! Let us know what you think in the comments below!

VISIT: FRONT PAGE // DAILY SECTION // BMX COLOR APP // BMX VIDEOS // RANDOM // BMX Games

Nowear To Ride – Indiegogo Fundraiser

October 4, 2016

As some of you might have heard by now, the Nowear crew out in Nebraska are working on building the states first Indoor Skatepark that allows BMX bikes at their compound! The facility is looking pretty rad, but they need to raise quite a bit of money to get the project done! They’re looking to raise $150,000 to get the building up and running. They have a bunch of rewards for different tiers of donations and this place will be completely FREE to ride for everyone! So, if you are interested, go check out the Indiegogo Campaign and make a donation! Big or small, everything helps!

We want to hear from you! Let us know what you think in the comments below!

VISIT: FRONT PAGE // DAILY SECTION // BMX COLOR APP // BMX VIDEOS // RANDOM // BMX Games

Wethepeoeple – Jordan Godwin Weekender

October 4, 2016

Here’s a short but sweet video Wethepeople dropped from a street session Jordan Godwin caught over the weekend! Plenty of technical grind lines cooked up in this one. Check it!

“50 seconds of pure perfection from the Welsh street wizard.

Filmed & edited by Nick Wotton.”

We want to hear from you! Let us know what you think in the comments below!

VISIT: FRONT PAGE // DAILY SECTION // BMX COLOR APP // BMX VIDEOS // RANDOM // BMX Games

Ethan Corriere – “Monster Mash” Behind the Scenes

October 4, 2016

The Common Crew coming through with a ton of B-Roll, crashes and random clips that were stacked by Ethan Corriere while filming for “Monster Mash“! This covers a couple years worth of footage and there’s plenty of gold to take in! We honestly forgot what he looked like with hair, haha.

“Take a look into some of the slams and crashes that went into the filming for Ethan’s epic Monster Mash section. We didn’t include everything but these highlights are no less enjoyable.

Film- Francis Castro/Sauce
Edit- Francis Castro”

We want to hear from you! Let us know what you think in the comments below!

VISIT: FRONT PAGE // DAILY SECTION // BMX COLOR APP // BMX VIDEOS // RANDOM // BMX Games