Bike Check Archives – Page 44 of 292

Billy Perry Spring 2018 Video Bike Check

May 7, 2018

Billy Perry dialed in a new bike with one of his signature Voyager frames from Volume…

Curious what Billy Perry is running for a setup these days? Here’s a video Billy whipped up from a trip to the bike shop to build up one of his new signature Voyager frames from Volume Bikes in his new Confetti colorway. Here’s a video Bike Check he put together giving you a full look at the build and a run through of everything he’s running!

“I built up a new bike for the Spring! I put on the Volume Bikes Voyager frame in my new signature color “Confetti”. I give a full run down bike check of all the parts I ride in the new FTL HQ and then we hit the streets of NYC for a great day of BMX riding.” – Billy Perry

Garrett Reynolds Video Bike Check

May 7, 2018

Get a closer look at Garrett Reynolds’ current Fiend setup!

Curious what Garrett Reynolds is rolling around on for a setup these days? Ride BMX caught up with Garrett for a new Video Bike Check where he gives us a full run through of his current Fiend and Cinema BMX setup with plenty of details on why he runs certain parts. There’s even a few sneak peeks in here like his new signature rims that he’s currently testing! Take a look!

“We all wish we could like Garrett Reynolds, but that just ain’t possible. But seeing as Garrett is such a nice guy, he went over all of his Fiend and Cinema parts for his bike check and explains why he sets his bike up the way he does. So at least you can build your bike just like his—as long as you’re not like six feet tall!

Frame: Fiend Reynolds, 20.75”, flat green tea
Fork: Fiend Process, 20mm offset, with invest cast dropouts.
Bars: Fiend Reynolds, 9” rise 27.25”—they come pre-cut because I hate cutting bars.
Stem: Fiend Reynolds V2
Grips: Fiend Team. I rub them on the ground before putting them on my bike to make them a bit more worn in.
Barends: Fiend
Headset: Fiend
Seatpost: Fiend
Seat: Fiend Reynolds with “Always Fiending” logo
Pedals: Cult, plastic
Cranks: Fiend Segments, 160mm
Sprocket: Fiend FND, 25-tooth
Chain: Factory generic
Front Tire: BSD 2.4”
Front Wheel: My signature Cinema rim sample laced to a Cinema VX2 hub with 2 CF plastic front hub guards.
Rear Tire: BSD Donnasqueak, 2.4”
Rear Wheel: My signature Cinema rim sample laced to a Cinema LSD FX freecoaster with CR and DR hub guards.
Pegs: Fiend Belmont plastic pegs 4.25”” – Ride BMX

Dan Lacey Spring 2018 Video Bike Check

April 30, 2018

Get a look at Dan Lacey’s current setup!

When it comes to the way a rider likes a setup, everyone has their own choice. Some people like to change things up, others stick to what they like. Dan Lacey is one of those riders that knows what he likes! Here’s a video Bike Check where Dan gives us a full run through of his Federal Bikes setup with Animal Bikes parts!

“Here is what Dan Lacey rides and he’s unabashed to tell you exactly why. Dan gives the run down of his revised signature Federal frame, explains why he only runs three pegs and a cassette, and more…

Frame: Federal DLX, 20.75”
Fork: Federal Liquid V2
Bars: Federal Lacey, 8.75”
Stem: Federal Hate (Front Load)
Grips: Animal Edwin
Barends: Federal Prototype
Headset: Federal
Seatpost: Federal Stump
Seat: Federal Mid, prototype
Pedals: Federal Contact
Cranks: Animal Akimbo
Sprocket: Federal BBS Guard
Chain: Animal Hoder
Front Tire: Federal, prototype
Front Wheel: Federal Stance XL rim, Federal prototype hub
Rear Tire: Federal, prototype
Rear Wheel: Federal Stance XL rim,Federal Stance Cassette
Pegs: Federal, 4.5″ plastic” – Dan Lacey

Brian Kachinsky Video Bike Check

April 23, 2018

Brian Kachinsky gives you a run through of his signature GT Globetrotter setup…

Curious what Brian Kachinsky is running for a setup these days? Here’s a new video Bike Check where Brian gives you a full run through of his current GT Bicycles setup that he goes to work on the street spots with.

“Brian Kachinsky gives the full rundown of what he rides, including his signature GT Globetrotter frame with a unique prototype Shred & Shed paint (similar to the GT tires), as well his signature seat and Elevated stem, Original 4-piece bars, and more…

FRAME: GT Globetrotter, 20.75”
FORK: Odyssey R32
BARS: GT Original 4pc bars, 9.125”
STEM: GT BK signature Elevated
GRIPS: GT Super Soft
BAR-ENDS: Odyssey Par Ends
HEADSET: Odyssey
SEATPOST: Animal Pivotal
SEAT: GT BK signature Transit Map Pivotal
PEDALS: GT PC Logo
CRANKS: Odyssey Thunderbolt, 170mm
SPROCKET: GT, 25-tooth
CHAIN: Shadow
FRONT TIRE: GT LP-5, 2.35”
REAR TIRE: GT LP-5, 2.35”
FRONT WHEEL: Odyssey Vandero Pro hub laced to an Odyssey Hazard lite rim
REAR WHEEL: Odyssey Clutch freecoaster laced to an Odyssey Hazard lite rim
PEGS: Primo 4.5” (Steel or plastic depending on the day)”

Subrosa – Mark Burnett Bike Check

April 17, 2018

Mark Burnett’s first Bike Check since joining the Subrosa squad…

It was announced the other week that Mark Burnett had joined the Subrosa Brand team. With that news, it was time for Mark to build up a brand new bike, and he chose Simone Barraco‘s signature Noster S frame for his first Subrosa build decked out top to bottom in Subrosa and The Shadow Conspiracy parts, including a handful of his own signature parts like the Odin stem and his new Penumbra seat. You can check out a bunch of photos and a full parts list over on the Subrosa Website now.

Expect to see Mark putting this beast to good use in his welcome video that’s expected to drop next Monday!

What do you think of Mark’s new bike? Are you digging the colors? Let us know what you think in the comments below!

Wethepeople BMX – Ahmet Samet Erdem Bike Check

April 16, 2018

Get a look at Ahmet Samet Erdem’s new setup!

The crew over at Wethepeople released a new Bike Check with their newest recruit from Turkey, Ahmet Samet Erdem and his brand new Battleship setup in the Corn Yellow colorway. This bike is decked out top to bottom in Wethepeople and Eclat parts, and it looks real good. You can check out a bunch of photos and a full parts list right here on the Wethepeople Website!

What do you think of that yellow and black combo? Are you digging it? Let us know in the comments below!

Wethepeople – Dillon Lloyd Spring 2018 Bike Check

April 13, 2018

Wethepeople dropped a new Bike Check with Dillon Lloyd!

The crew over at Wethepeople caught up with Dillon Lloyd for a brand new Bike Check to take a closer look at his brand new all black signature Buck setup loaded with Wethepeople and Eclat parts! You can check out a whole bunch of photos and a full parts list over on the Wethepeople Website now!

Had to do it…

Dan Kruk Spring 2018 Video Bike Check

April 9, 2018

Dan Kruk gives you a run through of his Wethepeople Battleship setup in this video bike check!

Here’s a video Bike Check that that guys over at Ride BMX must have let slip through the cracks featuring Dan Kruk giving us a run through of his setup with his signature Battleship frame colorway, as well as a handful of other signature parts from Wethepeople and Madera like his Party Paint Colorway. The reason we figure this is one that slipped through the cracks, is because Dan mentions his signature Stallis bars and frame colorway would be out in November, which came out last November, 5 months ago. Either way, the video is still rad and gives you a good look at what Dan is / was rolling around on, and it’s a dialed unit! Also, Dan is rad, so that makes it worth a share, too.

“An in-depth look at the Chicago bars ambassador Dan Kruk’s WTP / Madera bike.

Frame: WeThePeople “Battleship” 21″
Fork: WeThePeople “Battleship”
Stem: Madera “Mast” Topload
Bars: WeThePeople signature “Stallis” bars
Grips: WeThePeople “Hilt XL”
Tires: WeThePeople “Stickin'”
Front Wheel: Madera Pilot Hub laced to Gsport rim
Back Wheel: WeThePeople “Helix” free coaster laced to Gsport rim
Pegs: WeThePeople “Dill Pickle” Pegs
Seat: Madera “Cruiser”
Post: WeThePeople Pivotal
Sprocket: Madera “Signet” Bash-guard
Cranks: Madera “Bantam” 22mm 165 length
Pedals: Éclat “Seeker”” – Ride BMX